Canada gives Chinese tinplate and alloy steel bar broader surtax relief than it gives the same products from the United States. Any importer can recover Canada's 25% China surtax on whole tariff items of tin-coated flat steel and alloy bar under the China Surtax Remission Order. U.S.-origin goods in those items fall under Canada's 50% counter-surtax on U.S. steel, and Ottawa's general product relief for them covers only listed sizes and grades.
The November 17 arrangement with Beijing would keep that gap open. Canada agreed to extend existing remission measures for certain Chinese steel and aluminum products to December 31, 2028 and to expand coverage, in whole or in part, to 23 steel and 9 aluminum tariff items where Canadian supply is insufficient or unavailable. None of this is law yet. The Canada Gazette, Part II, of November 18 carries no amendment to the remission order, whose current remission window ends with goods imported on December 31, 2026. Remission also reaches only the China surtax, so Chinese steel entering after its quarterly quota is used still pays 50%.
A U.S. mill or service center selling these products to Canadian manufacturers should look first at the customer's request to Finance Canada for relief from the counter-surtax. Finance Canada considers exceptional remission where inputs cannot be sourced domestically or "reasonably from non-U.S. sources", or where other exceptional circumstances threaten severe harm to the Canadian economy. A request built on the sourcing ground will likely have to explain why remitted Chinese supply is not a reasonable alternative.
Three Canadian surtaxes can reach these goods, and Finance Canada's precedence rule lets only one apply. The 50% over-quota surtax on steel from outside the Canada-United States-Mexico Agreement comes first. Otherwise Chinese steel pays the 25% China surtax, and U.S. steel in the four items below pays the 50% counter-surtax.
Each origin has its own relief order. Schedule 1 of the China order grants remission to any importer, and Ottawa has described its goods as inputs "not reasonably available domestically or from alternative global suppliers". U.S. goods are relieved through the product schedules of Finance Canada's Remission List. Both rest on a shortage rationale, yet they describe these four items very differently.
Where Chinese steel gets the wider relief
Surtax relief by origin in four Canadian steel tariff items, as of November 18, 2026
| Canadian tariff item | China-origin relief, SOR/2025-12 Schedule 1 | U.S.-origin relief, Remission List Schedule 2 | Surtax if no relief applies |
|---|
| 7210.12.00, tin-coated flat steel 600 mm or wider, under 0.5 mm thick | Whole tariff item, any importer | Tinplate sheets in three listed sizes, 0.0135 inch, ASTM A623 or A624 | China 25%, U.S. 50% |
| 7212.10.00, tin-coated flat steel under 600 mm wide | Whole tariff item, any importer | Tinplate coil in five listed lengths, 0.0135 inch | China 25%, U.S. 50% |
| 7228.40.00, alloy steel bars and rods, forged | Whole tariff item, any importer | Grade 4140 within listed dimensions, and forged bars of listed AISI grades and specifications | China 25%, U.S. 50% |
| 7228.50.00, alloy steel bars, cold-formed or cold-finished | Whole tariff item, any importer | Listed aerospace grades and listed AISI grades and treatments | China 25%, U.S. 50% |
The table assumes ordinary commercial imports, with Chinese goods entered within quota. The Canada Border Services Agency's list of measures in force showed no anti-dumping or countervailing measure on these four tariff items on November 18. The table leaves out use-based relief for U.S. steel. A few named importers also hold importer-specific U.S. relief in Schedule 4.1, including for 7228.50.00.90.
On C$1 million of tinplate coil outside the five listed U.S. lengths, setting aside ordinary customs duty, the U.S. coil carries C$500,000 in counter-surtax on its value for duty. Chinese coil entered within quota carries a 25% surtax that the importer can claim back in full, subject to the order's conditions.
Use-based relief does not close this gap for packaging steel. Canada's general remission for U.S. steel used in manufacturing, processing or food and beverage packaging applies only to goods imported before February 1, 2026. Other U.S. product relief already carries earlier end dates. The same November amendment extends relief for U.S. steel used to manufacture motor vehicles and their parts, or used in aircraft and aircraft parts, to goods imported before July 1, 2028. A bar supplier whose customer machines automotive or aerospace parts may already have a route that a tinplate supplier lacks.
Quota and trade-remedy limits on the Chinese route
The tariff-rate quota order is the main limit. Chinese tinplate or alloy bar entering after the quarterly quantity is used pays its 50% surtax, the same rate as the U.S. product. Within-quota entry requires a valid import permit, and Finance Canada has set quotas for countries without a free trade agreement at 20% of 2024 import levels since December 26, 2025. U.S.-origin steel is outside the quota altogether. Unless Canada extends it, the quota order is repealed on June 27, 2027, so the quota limit is unsettled for most of the proposed window to 2028.
Four more conditions come from the China order itself. Goods cannot be subject to an order or finding under the Special Import Measures Act on the date of importation, and no other surtax relief can have been granted. Remission is also lost if the goods are exported to the United States in the same condition, so unprocessed Chinese steel cannot be routed to the U.S. market with Canadian relief kept. The importer must claim within two years.
Building the relief request for U.S. steel
The Canadian customer files the request as importer of record or downstream user, and only the importer of record can claim the relief once granted. The U.S. supplier usually holds the evidence. The records a broker needs before removing a Canadian counter-surtax still apply at entry.
On domestic supply, Ottawa's own China remission rationale already covers these goods. A request for the U.S. product can point to that statement for the same tariff item.
Chinese supply is where a U.S. request is most exposed. The quota, permit and trade-remedy limits above bear on whether Chinese supply is reasonable for a particular buyer, and so do qualification records. A can maker whose lines are qualified on a U.S. mill's tinplate, or a machine shop bound to a customer specification for a U.S. grade, has evidence that remitted Chinese product is not interchangeable. Finance Canada's published criteria do not say whether it will treat the China rationale as evidence, or how it will weigh the China remission against a U.S. request. Treating it as a reasonable alternative is an inference, but it is one a reviewer could draw.
The request should also build on the existing U.S. entries. Remission List items for tinplate and alloy bar are written as precise specifications. Asking to extend an existing item to adjacent sizes or grades, supported by mill test certificates and drawings, gives the reviewer a narrower decision than a request for a whole tariff item. Schedule 2 relief, once granted, has no import time limit under section 5.1 as replaced by the November amendment, which makes it more durable than the dated China window.
Gazette and quota records to watch before 2028
On the Chinese side, the Order in Council implementing the 2028 extension will show whether Schedule 1 keeps its whole-item descriptions and which 32 tariff items it adds or covers, in whole or in part. Any decision on the quota order before June 27, 2027 will set whether Chinese volume stays capped for the rest of the window. A Canadian anti-dumping or countervailing order on Chinese tinplate or alloy bar would end China remission for the goods it covers.
On the U.S. side, a new version of the Remission List could widen the tinplate or alloy bar entries. The comparison disappears altogether if a U.S.-Canada agreement withdraws the counter-surtax, an outcome the leaders' November 18 meeting in Shenzhen left open.
Until then, a U.S. supplier quoting 2027 and 2028 Canadian business in these four items should assume the customer pays 50% unless the goods match a listed U.S. specification, qualify for the auto and aircraft use relief while it runs to June 30, 2028, or fall under an importer-specific entry for that customer. If the announced extension is enacted, Chinese competitors can enter at no net surtax, within quota while the quota order stays in force and without that cap if it lapses.