For U.S. exporters, the European Union's year-end metals test under the Turnberry framework comes down to three tariff chapters. Article 3(2) of Regulation (EU) 2026/1455 lets the Commission switch off the 0% duty only for U.S.-origin goods in Combined Nomenclature chapters 72, 73 and 76, and only if, on December 31, 2026, the United States still applies a tariff rate higher than 15% to steel and aluminum derivatives imported from the Union. Under the EU's 2026 conventional duty rates, almost every chapter 72 steel mill product is already duty free. A suspension would put duty back mainly on U.S. aluminum, at 6 to 7.5% on most lines, and on dutiable chapter 73 articles such as bolts and screws at 3.7%.
Our June 17 read of the Turnberry suspension calendar, written before the regulation was published, described the December 31 test as a power over EU concessions generally. The published text narrows it. Annex I lists chapters 72, 73 and 76 whole, so the derivatives trigger is fixed by chapter. Suspension is discretionary and requires a Commission implementing act. A U.S. aluminum exporter quoting 2027 EU prices should key its duty-change clause to the date that act applies, not to January 1.
A machine classified in chapter 84 keeps its 0% duty under this trigger however much aluminum it contains, because Article 3(2) suspends Article 1 only for the Annex I rows covering the three metals chapters. Within those chapters the returning duty runs from free to 10%, depending on the heading.
| EU goods from the United States | Duty under Turnberry | CN 2026 conventional duty if suspended | EU measure that applies either way |
|---|
| Chapter 72 flat-rolled, long and other mill products | 0% | Free | Regulation 2026/1384 quotas and 50% out-of-quota duty on the CN lines its Annex I lists, most in headings 7208 to 7228 |
| Chapter 72 pig iron and ferro-alloys, 7201 and 7202 | 0% | Free to 7% | None found |
| Chapter 73 sheet piling, rail material, tubes and structures, 7301, 7302, 7304 to 7306 and 7308 | 0% | Free on most lines | Regulation 2026/1384 quotas for listed lines in 7301, 7302 and 7304 to 7306, not 7308 |
| Chapter 73 fasteners 7318 and other articles 7326 | 0% | 3.7% and 2.7% | None found |
| Chapter 76 unwrought aluminum, 7601 | 0% | 6%, with an autonomous 3% for unalloyed metal | None found |
| Chapter 76 bars, profiles, plates, sheet and foil, 7604 to 7607 | 0% | 7.5% on most lines, 10% on thin backed foil | None found |
Duty swing for U.S. metals if Article 3(2) is used, at CN 2026 conventional rates as of November 20, 2026.
For U.S. steel mill products the measure that bites is Regulation (EU) 2026/1384. It imposes a 50% out-of-quota duty on its listed steel categories and applies it to imports from preference partners, with no exemption for the United States. U.S. steel draws on the "Other countries" quota pools in every category but one. Its only country-specific quota, 509 tonnes a year, covers narrow clad flat-rolled steel under CN 7212 60 00 in category 1.B. On our reading, a Turnberry suspension would leave that regime as it is.
Section 232 full-value duties and the EU's 15% condition
Since April 6, 2026, Proclamation 11021 has applied the Section 232 metals duty to full customs value, regardless of metal content. EU derivatives in Annex I-A pay 50% and those in Annex I-B pay 25%. Two tiers sit at 15% all-in. The first covers Annex III fixed industrial machinery and power equipment, plus agricultural equipment and certain residential HVAC since June 8, for every normal-trade-relations origin. The second comes from Proclamation 11032 on the Section 232 metals tariff regimes, signed June 1, which set Annex I-C mobile industrial equipment at 15% all-in for listed partners, including any member nation of the European Union. Both 15% tiers revert to the 25% rate on January 1, 2028.
The regulation does not say whether "tariff rate" means the rate on metal content or on the whole product. On full value the question no longer matters for Annex I-A and I-B goods, which pay 25% or 50% on the whole entry. On our reading the condition is met today and stays met unless Washington changes those tiers before December 31. Under clause (11) of Proclamation 11021, Commerce and USTR can jointly add derivatives at those higher rates through the Section 232 derivative inclusion process.
Recital 12 of the EU regulation records that the Joint Statement does not apply the 15% ceiling to steel and aluminum. On metals, paragraph 3 of the August 21, 2025 Joint Statement goes no further than saying the two sides "intend to consider the possibility" of ring-fencing and tariff-rate quota solutions for steel, aluminum and derivatives.
No automatic snapback on January 1
The Commission "is empowered" to act, so suspension is discretionary. It would come through an implementing act adopted under the examination procedure in Article 3(3) and Article 5, with Member States voting in the Trade Barriers Committee. The regulation provides no urgency procedure, so nothing changes by operation of law on January 1. On our reading, any act would apply only from the date it sets, and Article 3(3) keeps it in place only for as long as the U.S. condition persists.
The Commission must report to Parliament and the Council by December 1 on U.S. tariff treatment of EU derivatives, and the text does not require that report to recommend action. EU-US trade relations are on the provisional agenda for the November 30 meeting of EU trade ministers, a day before that report is due.
Article 3(1) gives the Commission a second route. It allows suspension of Articles 1 and 2 in whole or in part on broader grounds, including failure to implement the Joint Statement, but only after an examination based on substantiated information. That route could reach chapter 84 machinery or the tariff quotas, which the December 31 test cannot.
Pricing 2027 aluminum and fastener sales into the EU
For a U.S. exporter of aluminum products or chapter 73 steel articles, the 2027 quote starts with the CN chapter and heading of every SKU. Chapter 76 lines and dutiable chapter 73 headings carry the Turnberry exposure, while chapter 72 mill products and chapter 73 tubes need a quota check under Regulation 2026/1384.
A 2027 quote on exposed lines could name the replacement rate, 7.5% for most aluminum semis and 3.7% for fasteners, and apply it to entries made on or after the date the implementing act sets. Unwrought unalloyed aluminum is the outlier. The CN shows a 6% conventional rate and a 3% autonomous rate, and on our reading the lower 3% would apply, though we have not checked TARIC for this line.
What moves before the December 31 test
The Commission's December 1 report is the first place it could signal whether it means to act. A U.S. proclamation before December 31 that lowers EU derivative rates to 15% or below, for example through the tariff-rate quota route the Joint Statement mentions, would shrink the set of derivatives that meets the condition. Article 3(2) tests U.S. treatment of EU derivatives as a whole, and on our reading any tier left above 15% would keep the condition met. How the Commission would treat derivatives at exactly 15% all-in remains open. If a suspension date is coming, it would show up first as a draft implementing act submitted to the Trade Barriers Committee. The CN 2027 schedule could also move the conventional rates in the table.