Country of Origin of Printed Circuit Board Assemblies
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Based on the information provided, the country of origin of the PCBAs is the United States.
Ruling text
This letter is in response to your request, on behalf of Axis Communications AB, (hereinafter “Axis AB” or “Requestor”) dated November 27, 2024, for a binding ruling regarding the country of origin of certain Printed Circuit Board Assemblies (“PCBAs”). You have asked that certain information submitted in connection with this ruling be treated as confidential. Inasmuch as this request conforms to the requirements of 19 C.F.R. § 177.2(b)(7), the request for confidentiality is approved.
The confidential information contained in the attachments to the ruling request will not be released to the public and will be withheld from published versions of this ruling. FACTS: The products at issue are several types of PCBAs that are manufactured in the United States from component parts from the United States and parts imported from China, Sweden, and other European Union countries.
Axis AB uses two different processes to manufacture the boards into PCBAs: Surface Mount Technology (“SMT”) and Pin-Through-Hole (“PTH”). The SMT and PTH process are performed in the United States and are described as follows: For both the SMT and PTH, the process begins with: 1. Marking (via laser and if not practical then via labeling): For traceability all boards need to be marked (approximately 2 to 3 hours). 2.
Electrostatic Discharge (“ESD”): When preparing for PCBA assembly ESD is needed to secure the production environment against unwanted ESD events that may damage the assembly (approximately 2 to 3 hours). 3. Printed Circuit Board (“PCB”) Panel Design: The majority (if not all) of the PCB’s needs to have a PCB panel designed in order to run production of the PCB boards in the automated production lines (approximately 1 hour).
For the SMT process, components are placed and soldered on plated pads on the surface of the PCB. This consists of: 1. Solder paste application: This is the process where the solder paste is printed on the board, this is needed to be able to solder components to the board and get the required electrical connection. All boards need to go through the solder paste application process (approximately 2.5 to 3 hours). 2.
Dispensing: The process where either solder paste and/or adhesive is applied on the board via dots from a nozzle (needle type) (approximately 1 hour). 3. Solder Paste Inspection: Inspection of solder paste application. All boards need to go through the solder paste inspection process (approximately 2 to 3 hours). 4. Component Mounting: This process involves populating the board. This is done in the mounting machines. An SMT line today consists of a minimum two SMT machines.
For larger and more populated boards – there are more than two SMT machines in the line. All boards go through the mounting process (approximately 2 to 3 hours). 5.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (H344034).