The country of origin and applicability of Section 301 remedies regarding a sink faucet and pop-up drain
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- As the origin of the valve is Thailand, the country of origin of the sink faucet in scenario one will be Thailand.
- The country of origin of the sink faucet in scenario two will be Thailand.
- In scenario three, sourcing the zinc faucet parts, i.e., handles, waterspout, and base plate from China, will not change the country of origin because they are less significant components and will be substantially transformed during assembly in Thailand.
Ruling text
In your letter dated October 21, 2024, you requested a country of origin ruling on a sink faucet and pop-up drain on behalf of your client, Gerber Plumbing Fixtures LLC. Technical information was provided with your submission. The item under consideration is described as a double-handle, three-hole bathroom sink faucet with four-inch center handle spacing and a mid-arc spout, packaged for retail with an accompanying pop-up drain assembly (item number F51A1160CP-LGA6).
As stated in your letter, there are four country of origin scenarios for consideration. In scenario one, the assembly of the faucet occurs in Thailand of primarily Thai and Chinese components. First, zinc alloy ingots are melted in a furnace and formed into the desired shapes of faucet handles and the cover plate using Thai-designed and manufactured diecast tools. The die cast parts are then sanded and machined to tap and notch the items for mating with other parts of the system for functional purposes.
After sanding, the parts are electroplated for corrosion resistance and durability. Throughout the initial assembly process, the components undergo testing for quality control. Regarding the valve body assembly in Thailand, glass fiber reinforced semi-crystalline polyamide pellets are heated, dehumidified, melted, and injection molded into valve raceway pipes.
The Thai manufactured plastic raceways are combined with Chinese manufactured threaded brass pipe segments and over-molded with additional glass fiber reinforced semi-crystalline polyamides to create the valve body. Spout pipe segments are formed in Thailand by plastic injection molding of glass fiber reinforced semi-crystalline polyamide. The pipe segments are assembled manually and over-molded with additional glass fiber reinforced semi-crystalline polyamide which results in the final spout.
O-rings from China are inserted into the spout with lubrication, and the spout is connected to the valve body via press fitting and twisting. Using component parts from China, the valve cartridges are assembled by specially trained personnel in Thailand. Comprised of injection molded plastic parts, a brass stem, gaskets, and two internal ceramic discs, the principal function and purpose of a valve cartridge is to control the flow of water. Assembly begins with greasing and sliding a gasket onto a brass stem.
Following that, two greased ceramic discs (top rotating and bottom fixed) are stacked in the correct orientation and a plastic insert is placed on top of the rotating disc. The brass stem is placed onto the plastic insert to allow for rotation of the ceramic disc. Next, a greased plastic housing is installed over the stack of brass stem, plastic insert, and ceramic discs.
A greased O-ring is slid onto a notch around the cartridge housing and a greased gasket plug is press fit into the bottom of the cartridge housing. To complete the valve cartridge assembly, a plastic clip is attached to the brass stem to hold the cartridge securely in place. Testing is conducted to verify specific quality requirements. The fully assembled valve cartridges are silicon-lubricated and press-fitted by hand into the valve body.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N343447).