The country of origin of dental needle tips
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Accordingly, the country of origin of the dental syringe tips will be Japan, South Korea, or India depending on the country of origin of the pre-cut, pre-processed stainless steel tubes.
Ruling text
In your letter dated November 5, 2024, on behalf of Inter-Med, Inc. (d/b/a “Vista Apex”), you requested a country of origin ruling on dental syringe tips. Additional information was provided by email, dated November 11, 2024. The products under consideration are Pre-bent Tips, MST Universal Pre-bent Tips, Appli-Vac Bendable Tips, Appli-Vac Irrigation Tips, and Vista Probe Irrigation Tips. When attached to a syringe, these tips serve as delivery tips to deliver dental solutions and materials in the oral cavity.
Each dental syringe tip will consist of two to three parts: all consist of (1) a thin hollow tube (also referred to as "cannula” or “needle” in your letter), (2) a plastic hub adapter (“hub”), and (3) optionally – a plastic sheath (cap). Only the tubes of Pre-bent Tips and MST Universal Pre-bent Tips are bent to fixed angles with a blunt end. Appli-Vac Bendable Tips have blunt end straight tubes. The tubes of Appli-Vac Irrigation Tips are slotted and side-vented.
Vista Probe Irrigation Tips have closed end tubes with a side port. The pre-cut tubes will be manufactured in Japan, South Korea, or India. The plastic hubs, and sheaths if present, will be sourced in China. Assembly of the finished dental syringe tips will be performed in China. The processing to produce the complete dental syringe tips is described in your letter as follows: Manufacture of Cannula in Japan, South Korea, or India: A flat strip of stainless steel will be rolled and laser-welded into a tube shape.
The tube will be cold-worked through a die several times to toughen it and reduce the size down to the specified gauge dimensions, ranging from 16ga to 31ga. An electric blade will cut the tubing to individual cannulas at specified lengths. A grinding machine will then create any specified features on the cannula end, including slotted/skive cuts or side ports. Some cannulas, as in the case with side port tips, will undergo another step to close the end off through crimping or laser-welding.
Next the cannula will undergo heat treatment, either tempering or annealing to give the cannula its desired ductility, electropolishing to remove any burrs and give it luster, and citric acid passivation for rust prevention. All of the manufacturing processes require highly specialized machinery and skilled labor, and inspections are performed at each step. Assembly and Packing in China: To complete the assembly of a syringe tip using the cannula and hub, an automated assembly machine will be utilized.
The machine will be loaded with components, and automatically take the plastic hub, insert a cannula, apply an epoxy, cure the epoxy with flashes of ultraviolet radiation, and may optionally bend the cannula. No processing will be performed to the cannulas or hubs at the facility other than this assembly. After assembly, the tips will be packaged in multiple configurations to match SKUs specified by Vista Apex.
A sheath may be placed on individual tips, and tips will be packaged in cups, bags, or blister packs at various quantities. These cups, bags, or packs will be placed in corrugate boxes for shipping. The marking statute, section 304, Tariff Act of 1930, as amended (19 U.S.C.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N343771).