The country of origin of dental syringe brush tips
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Accordingly, the country of origin of the dental syringe brush tips will be Japan, South Korea, or India depending on the country of origin of the pre-cut, pre-processed tubes.
Ruling text
In your letter dated November 5, 2024, on behalf of Inter-Med, Inc. (d/b/a “Vista Apex”), you requested a country of origin ruling on dental syringe brush tips. Additional information was provided by email, dated November 13, and November 15, 2024. The products under consideration are Sol-u-Flo Applicator Tips and Stat-Flo Hemostatic Brush Tips. When attached to a syringe, these tips serve as delivery tips to deliver dental solutions and materials in the oral cavity.
Each dental syringe brush tip will consist of three parts: (1) a thin hollow stainless-steel tube (also referred to as "cannula” or “needle” in your letter), (2) a fiber brush, and (3) a plastic hub adapter (“hub”). The tubes are pre-bent at a fixed angle. The tubes will be manufactured in Japan, South Korea, or India. The fibers will be made in the United States. The plastic hubs will be sourced in China. Assembly of the finished dental syringe brush tips will be performed in China.
The processing to produce the complete dental syringe brush tips is described in your letter as follows: Manufacture of Cannula in Japan, South Korea, or India: A flat strip of stainless steel will be rolled and laser welded into a tube shape. The tube will be cold-worked through a die several times to toughen it and reduce the size down to the specified 19ga tubing. An electric blade will cut the tubing to individual cannulas at specified lengths with a blunt end without burrs or sharp edges.
Next, the cannula will undergo heat treatment, either tempering or annealing to give the cannula its desired ductility, electropolishing to remove any burrs and give it luster, and citric acid passivation for rust prevention. All of the aforementioned processing requires highly specialized machinery and skilled labor and inspections are performed at each step. Manufacture and Optional Coating of Fibers in the United States: A bundle of fibers, either polypropylene or nylon, will be combined into a roll of thread.
This process will be done by highly specialized equipment by contracted manufacturers to the specifications set by Vista Apex. Select fibers will be further processed at Vista Apex’s facility in the United States to apply a polymer coating. This process will be carried out by custom-built specialized equipment that Vista Apex has independently constructed at its facility. To add the polymer coating to select fibers, a slurry will be batched and mixed to Vista Apex specifications.
The fibers will be then loaded into Vista Apex’s equipment which dips the fibers through this slurry at a specific rate to add a uniform coating of the slurry to the fibers. The coated fibers will then progress through a die and various heating elements to dry the coating onto the fibers. The coated fibers in rolls of thread will then be packaged and shipped to China for assembly of the fibers within the tips.
Assembly and Packing in China: To complete the assembly of a dental syringe brush tip using the cannula and hub, an automated assembly machine will be utilized.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N343774).