The country of origin of wheel speed sensors
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Based upon the facts presented, the country of origin of the ABS wheel speed sensors, part numbers 20040003 and 20040353, will be Thailand.
Ruling text
In your letter dated November 11, 2024, you requested a country of origin ruling. The two items at issue with this request are described as ABS wheel speed sensors for use in vehicles. The first item, identified as part number 20040003, is comprised of an electromagnetic core within a housing with a connector at one end. You state that the device is attached within the wheel of a vehicle in order to detect the speed of the wheel.
This function is achieved by the device creating a magnetic field around the target wheel. As the wheel rotates, the magnetic field is broken and an electrical impulse is sent to the vehicle’s Electronic Control Unit (ECU) for interpretation of the wheel’s speed and rotation. The second item, identified as part number 20040353, is comprised of a length of insulated wire with a Hall Effect sensor attached at one end.
Like part number 20040003, this item is also attached within the wheel of a vehicle in order to detect the speed of the wheel. The Hall Effect sensor, which is comprised of a Hall Effect integrated circuit (IC), creates a magnetic field around the target wheel. The IC senses when the wheel rotates and passes through the field and sends an electrical signal through the attached cable to the ECU for interpretation.
In your request, you state that the manufacturing process for part number 20040003 is performed entirely in Thailand. The process begins with Thai originating lacquered wire being wrapped around the plastic coil frame, which also incorporates the electrical connection portion of the device. A magnet, also originating from Thailand, is then attached along with an iron core. This assembly is then encased within a metal housing prior to the sensing head being attached.
The finished device is then inspected and packaged for shipment to the U.S. The manufacturing process for part number 20040353 also occurs in Thailand. This process begins with Thai originating insulated wire being cut to length and the ends prepared for the addition of the sensor element. The Hall Effect ICs, also of Thai origin, are then bent and installed within the molded sensor housing.
The electrical terminals, which originate from China, are then added to the sensor housing before it is attached to the cable. The finished sensor is then inspected and tested prior to being packaged for shipment to the U.S. The “country of origin” is defined in 19 CFR 134.1(b), in pertinent part, as “the country of manufacture, production, or growth of any article of foreign origin entering the United States.
Further work or material added to an article in another country must effect a substantial transformation in order to render such other country the 'country of origin' within the meaning of this part.” For tariff purposes, the courts have held that a substantial transformation occurs when an article emerges from a process with a new name, character or use different from that possessed by the article prior to processing.
United States v. Gibson-Thomsen Co., Inc., 27 CCPA 267, C.A.D. 98 (1940); National Hand Tool Corp. v. United States, 16 CIT 308 (1992), aff’d, 989 F. 2d 1201 (Fed. Cir. 1993); Anheuser Busch Brewing Association v.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N343952).