The country of origin of speed sensors
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Based upon the facts presented, the country of origin of the speed sensors, part numbers 20010031 and 20010104, will be China.
Ruling text
In your letter dated November 11, 2024, you requested a country of origin ruling. There are two items at issue with this request that are both described as speed sensors for use within vehicles and are identified by part numbers 20010031 and 20010104. These devices are comprised of a Hall Effect sensor integrated circuit (IC) within a plastic housing with a connection point at one end.
You state that the devices are installed within the transmission system of a vehicle and provide speed information for the wheels and turbines within the system. This is accomplished by the sensors acting as a transducer by creating a magnetic field around the target wheel or turbine. As a target passes through the field, the Hall Effect IC registers this presence and transfers this to an electrical impulse that is sent to the Transmission Control Unit (TCU).
The TCU then interprets and processes this signal into a speed for the wheel or turbine. This allows the transmission to effectively shift gears as the vehicle is in motion. In your request, you state that the manufacturing process is virtually identical for the two models and occurs in Thailand. The Hall Effect IC, which in both cases is manufactured in China, is attached to a Printed Circuit Board (PCB) of Thai origin.
Based on the information provided, this process consists of bending and soldering the leads of the IC to the PCB. Further, the PCB does not contain any other active elements and is only used as a connection point. The IC and PCB subassembly are then inserted into the plastic frame and enclosed with a plastic shell, which originates in Thailand.
The finished device is then inspected, tested and packaged for shipment to the U.S. The “country of origin” is defined in 19 CFR 134.1(b), in pertinent part, as “the country of manufacture, production, or growth of any article of foreign origin entering the United States.
Further work or material added to an article in another country must effect a substantial transformation in order to render such other country the 'country of origin' within the meaning of this part.” For tariff purposes, the courts have held that a substantial transformation occurs when an article emerges from a process with a new name, character or use different from that possessed by the article prior to processing.
United States v. Gibson-Thomsen Co., Inc., 27 CCPA 267, C.A.D. 98 (1940); National Hand Tool Corp. v. United States, 16 CIT 308 (1992), aff’d, 989 F. 2d 1201 (Fed. Cir. 1993); Anheuser Busch Brewing Association v. The United States, 207 U.S. 556 (1908) and Uniroyal Inc. v. United States, 542 F. Supp. 1026 (1982). Regarding the origin of the subject sensors, it is the opinion of this office that the Hall Effect IC imparts the character of the finished device. This IC provides the essential functions of the device.
Further, the assembly process performed in Thailand is simple in nature and would not result in a substantial transformation of the individual components into new and different articles of commerce. Based upon the facts presented, the country of origin of the speed sensors, part numbers 20010031 and 20010104, will be China.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N343953).