The country of origin of hermetic compressors
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated November 13, 2024, you requested a country of origin ruling on hermetic compressors on behalf of Jiaxipera Mexico S. de R.L. de C.V. Technical information was submitted with your request. The items for consideration are described as hermetic compressors for refrigeration appliances, models TB1114HY, TH1114HY, and TU1112HY. During operation, the compressors function to move refrigerant through the cooling system of an attached appliance.
The primary components of hermetic compressors are the stator, rotor, housing, crankcase, crankshaft, piston, piston pin, connecting rod, internal discharge tube, oil pump, valve components, nameplate, and cover. Additional components incorporated during assembly include, but are not limited to, screws, washers, wire, gaskets, and ball bearings. The shell of the compressor is constructed from steel sheet.
The top portion is welded to the bottom portion, creating a hermetically sealed connection which prevents refrigerant from leaking to the outside. The stator is a lamination stack of steel sheet together with two windings of copper wires. The rotor is a lamination stack that is cast in aluminum. The crankshaft is connected to the rotor and transmits the rotation of the motor into reciprocating strokes of the piston.
As a result, the cylinder moves up and down and allows refrigerant to be drawn in, compressed, and discharged. Refrigerant is pulled into the compressor through a suction connector, and it is routed out by a discharge connector. Valves assist with opening and closing the valve plates during the suction and discharge actions. In addition, the compressors are fitted with internal springs to reduce vibration and a muffler to reduce noise.
Assembly of the hermetic compressors will occur in Mexico of mostly Chinese origin components, with the exception of aluminum ingot purchased in Mexico but sourced from India, assembly oil sourced from the U.S., and packing materials sourced from Mexico. Of note, the stators and rotors will be manufactured in Mexico from Chinese-origin materials. The mechanical unit consisting of the motor, cylinder, and valves will be assembled into the bottom housing in Mexico.
In your submission, you state the manufacturing process requires several trained employees and various machinery to complete 86 separate operations that cover the stator, rotor, lower housing, and compressor. Stator production begins with the loading of steel lamination sheet into the feeder of a lamination stacker machine to produce a lamination stack to specifications.
The formed lamination stack is placed on a transfer rack where slot insulation of polyester film is inserted into 24 slots on the lamination stack. A main coil winding machine places the main phase winding of enameled wire and inserts the main winding into the lamination slots. In the first forming process, a coil forming machine forms the main winding ends to a specified sharpness.
The winding is then manually checked by an employee for indentations and wedge integrity and a lead wire is placed into the correct location.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N344002).