The country of origin of a bent axis hydraulic motor
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- As a result, it is the opinion of this office that the country of origin for the CMV 170 CC bent axis hydraulic motor will be Germany for marking purposes.
Ruling text
In your letter dated November 14, 2024, you requested a country of origin ruling on a bent axis hydraulic motor, for marking purposes and for purposes of applying trade remedies under Section 301, as amended, from China, which you filed on behalf of your client, Linde Hydraulics Corp. The article under consideration is a CMV 170 CC bent axis hydraulic motor, which is designed to be used as a propulsion system for mobile machinery like bulldozers, excavators and skid loaders.
It can also be used in industrial applications, such as conveyers and molding machines, and construction equipment like winches, crane drives and self-propelled cranes and lifts. The motor operates on the principle of converting hydrostatic energy into mechanical energy. It converts hydraulic pressure into rotational force which is transmitted into useful work via an output drive shaft. You state that the motor motor consists of stationary and rotating components.
The stationary components form the cover of the motor, while the rotary components convert the hydraulic pressure into a rotary motion. The main stationary components include a main housing and a port plate housing. The main housing serves primarily to enclose the motor and provide support to the internal rotating parts. The port plate also serves to enclose the motor and has ports to channel hydraulic fluid into and out of the motor.
The key rotational components (rotary group) include a cylinder block with piston bores, hydraulic pistons, precision roller bearings and seals, and a highly complex splined output driveshaft. A solenoid operated hydraulic controller is used to control the rotational output of the motor.
Based on the submission provided with your request, the port plate, control piston, and some other components of the rotary group are made in China, and imported to Germany along with some stationary components of the motor from China, Switzerland, Czech Republic, France, Great Britain, Ireland, Italy, Turkey, and Taiwan. The cylinder block, hydraulic pistons, output shaft, and the rest of the components of the rotary group, as well as some stationary components of the motor are made in Germany.
In Germany, all components of the motor are assembled together using various specialized machines.
Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v. Friedlander & Co., 27 C.C.P.A.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N344048).