The country of origin and applicability of Section 301 remedies regarding a vacuum pump
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated November 15, 2024, you requested a country of origin ruling regarding a vacuum pump on behalf of your client, Zhejiang Value Mechanical & Electrical Products Co., Ltd. Technical information was submitted with your request. The item for consideration is described as a vacuum pump designed for users to attach hoses or fittings for efficiently extracting air or gases from sealed systems.
The subject pump consists of nine functional component groups: motor, printed circuit board assembly (PCBA), housing, bottom plate, bottle oil, oil tank, pump body, air intake module, and other components. The integrated motor powers the pump by converting electrical energy into mechanical rotation to create a vacuum. The created vacuum facilitates the movement of fluids or gases through the system. The motor is comprised of several sub-components.
The stator and rotor are manufactured in Thailand, and the remaining components, including, but not limited to capacitors, a fan, fasteners, springs, and seals are manufactured in China. The PCBA is manufactured in China and controls the electrical operations, signal processing, and power management of the pump. Furthermore, the housing is manufactured in China and provides physical protection, structure, and support for the internal components.
The bottom plate, manufactured in China, acts as the base to stabilize the pump, reduces vibrations, and ensures mechanical support. Additionally, the bottle oil from China lubricates, cools, and ensures smooth operation of the pump’s moving parts. The oil tank from China stores pump oil and filters contaminants. It also provides oil level visibility to the user. The pump body is manufactured in China and generates suction and a vacuum using the mechanical rotation powered by the motor.
The air intake module from China regulates airflow and connects the intake to the pump. Additional components from China are integrated into the vacuum pump and include, but are not limited to wiring, screws, and other small items. In part, these components function to support the assembly and complete minor structural connections. In your submission, you described a production process comprised of 45 discrete steps. The manufacture of the Chinese components accounts for 18 steps.
First, brackets are cleaned by ultrasonic bath to ensure no foreign materials are present. After washing, the brackets are rinsed and dried. Next, the fore pump stator is milled by a machining center and cleaned by ultrasonic bath, rinsed, and dried. Following that, the rear pump stator is milled to precise dimensions, inspected, and the process holes are sealed with glue. At that point, the pump rear cover is milled, cleaned by ultrasonic bath, rinsed, and dried.
Then, the rear cover is polished, holes are reamed, and the gas-ballast connector is cleaned, sealed, and fit into position. After that, the bottom board is milled, deburred and cleaned in an ultrasonic bath. The oil tank and lamp cover are cleaned in an ultrasonic bath, rinsed, and dried. The lamp cover is then glued into the oil tank groove. The sight glass cover is milled and subsequently engraved with text using a laser.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N344081).