The country of origin of a tie rod assembly
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated November 21, 2024, you requested a country of origin ruling on the tie rod assembly for marking purposes. In addition, you also requested an origin determination on the components of the tie rod assembly, such as the outer tie rod end and the inner tie rod end, if imported separately. The articles under consider consideration are a tie rod assembly (MFG Number VES3710A), and two components of the tie rod assembly, the outer tie rod end and inner tie rod end, which you may import separately.
The tie rod assembly and its parts are essential components of a vehicle’s steering system as they ensure that the wheels are aligned enabling the vehicle to be steered accurately. The tie rods connect the steering gear to the steering knuckle on each front wheel. When the steering wheel is turned, the steering gear moves the tie rods, which in turn push or pull the wheels to change their direction. Additionally, the tie rods help maintain proper alignment of the wheels and help tires wear evenly.
The tie rods connect directly to the steering gear through the inner tie rod and transfers the movement from the steering gear to the outer tier rod. The outer tie rod connects to the steering knuckle and transfers the movement from the inner tie rod to the wheel. The tie rod ends are the joints at the ends of the tie rods that allow for the necessary pivoting and movement. The inner tie rod is covered by a bellow kit or tie rod boot that protects it from dirt, debris, water, and other contaminants.
Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v. Friedlander & Co., 27 C.C.P.A. 297, 302 (1940).
Part 134 of the U.S. Customs and Border Protection (“CBP”) Regulations (19 CFR 134) implements the country of origin marking requirements and exceptions of 19 U.S.C. 1304. Section 134.1(b), CBP Regulations (19 CFR 134.1(b)), defines “country of origin” as the country of manufacture, production, or growth of any article of foreign origin entering the United States.
Further work or material added to an article in another country must effect a substantial transformation in order to render such other country the “country of origin” within the meaning of the marking laws and regulations.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N344176).