The country of origin and applicability of Section 301 Trade Remedies of Junction Blocks
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated November 22, 2024, you requested a country of origin ruling on behalf of your client, Hyundai Motor Company. There are two items under consideration that are identified as the Junction Block Assy-HI/VLT, PN 91958-DS030 and PN 91958-DO310, which are both described as an enclosure with internally mounted fuses, bus bars, a relay, wiring, and hardware.
The Junction Blocks are used in electric vehicles to provide high voltage electrical connections between the vehicle electrical systems and the high powered inverter. In your letter, you state that the relay is sourced from Japan, while the balance of all materials used in the manufacturing of the Junction Blocks, such as the fuses, the bus bars, the enclosure, and the hardware, are sourced from Korea.
In Korea, the electrical apparatus and wire are mounted inside the enclosure and bolted in place, the Junction Blocks are inspected, tested, and packaged for export to the United States.
Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v. Friedlander & Co., 27 C.C.P.A. 297, 302 (1940).
Part 134 of the U.S. Customs and Border Protection (“CBP”) Regulations (19 CFR 134) implements the country of origin marking requirements and exceptions of 19 U.S.C. 1304. Section 134.1(b), CBP Regulations (19 CFR 134.1(b)), defines “country of origin” as the country of manufacture, production, or growth of any article of foreign origin entering the United States.
Further work or material added to an article in another country must effect a substantial transformation in order to render such other country the “country of origin” within the meaning of the marking laws and regulations. Regarding the country of origin of the Junction Blocks, in our view, the assembly operations performed in Korea, which consists mainly of inserting and fastening the components into a housing, are neither complex nor do they substantially transform the articles being assembled.
However, it is the opinion of this office that the Korean origin bus bars and fuses produce the function of the device because they are the articles within the assembly that are making the electrical connections between the vehicle’s inverter and the electric motor(s).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N344206).