The tariff classification and status under the United States-Colombia Trade Promotion Agreement (CTPA), of a grease fitting from Columbia.
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- As previously noted, the grease fitting is classified under subheading 8487.90.0080, HTSUS.
Ruling text
In your letter dated December 4, 2024, you requested a ruling on the status of a grease fitting from Colombia under the CTPA on behalf of your client, Lubrication Components Mfg. Co. The merchandise under consideration is a grease fitting with a 7/16-inch hex, a 1/8-inch by 27 PTF thread, and a 21/32-inch overall length. The grease fitting is screwed into machinery or components that require periodic lubrication. It has a threaded end and a nipple designed to seal against a grease gun coupler.
Within the fitting is a spring-loaded check ball to prevent leakage and to prevent dirt or contaminants from entering the machine component. When pressure is applied, the spring-loaded mechanism allows lubricant to flow into the component. Even though the described grease fitting is identified as part number GH1010, you state additional part numbers of different threads, lengths, diameters, etc., will be manufactured using the same sourcing and operational steps.
The applicable subheading for the grease fitting, part number GH1010, will be 8487.90.0080, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, and not specified or included elsewhere in this chapter: Other: Other.” The rate of duty will be 3.9 percent ad valorem. The subject grease fitting is manufactured in Colombia.
The process begins with forming the body which is machined from hexagonal steel bars sourced from Spain. Chinese wire is coiled into a spring, which is then inserted with a Chinese-sourced steel ball into the body to complete the grease fitting. In your submission you request a determination on the eligibility of the grease fitting for preferential treatment under the United States-Colombia Trade Promotion Agreement (CTPA). The requirements of the CTPA are described in General Note 34 of the HTSUS.
General Note 34(b) indicates that, for the purposes of this note, subject to the provisions of subdivisions (c), (d), (n) and (o) thereof, a good imported into the customs territory of the United States is eligible for treatment as an originating good of Colombia or of the United States under the terms of this note if— (i) the good is wholly obtained or produced entirely in the territory of Colombia or of the United States, or both; (ii) the good is produced entirely in the territory of Colombia or of the United States, or both, and— (A) each of the nonoriginating materials used in the production of the good undergoes an applicable change in tariff classification specified in subdivision (o) of this note; or (B) the good otherwise satisfies any applicable regional value-content or other requirements set forth in such subdivision (o); and satisfies all other applicable requirements of this note and of applicable regulations; or (iii) the good is produced entirely in the territory of Colombia or of the United States, or both, exclusively from materials described in subdivisions (i) or (ii), above.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N344427).