The country of origin and eligibility of the United States-Mexico-Canada Agreement (USMCA) for a polyurethane prepolymer from Canada.
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
This is in response to your letter, dated December 26, 2024, requesting a ruling on the country of origin of a polyurethane prepolymer for purposes of applying trade remedies under Section 301 of the Trade Act of 1974, as amended, from China as well as the eligibility of the USMCA. The product under consideration is referred to as Wannate 9134. It is a polyurethane prepolymer that is characterized by its easy dispersion in water.
It demonstrates excellent bonding strength and water resistance and is highly suitable for spray foam applications. The classification of this product was ruled on in New York Ruling N338752 dated April 4, 2024. The current ruling addresses whether two new production processes for the Wannate 9134 result in a substantial transformation and eligibility of USMCA.
Polymeric methylene diphenyl diisocyanate (Polymeric MDI or PMDI) of Chinese origin and Poly(ethylene glycol) monomethyl ether (polyol) of U.S. origin are imported to Canada. There the products can undergo three separate manufacturing processes in Wanhua’s plant in Canada: the Batch Reaction process (previously ruled on in N338752), the In-line Reaction process or the Drum or Tote Reaction process.
The In-Line Reaction process consists of the following steps: 1) Preparation: Heat the PMDI in the supply tank and connect to the metering pump before the in-line reactor. 2) Preparation: Connect the polyol tote to the metering pump before the in-line connector. 3) Reaction: Meter PMDI and polyol at separate rates into the in-line reactor which allows each reactant to be metered precisely at independent rates.
The reactor also includes a static reactor element that forces rapid mixing and reaction while moving the two components through the reactor. When an in-line reactor is used, the chemical reaction occurs in the static mixing portion of the in-line reactor. The reaction occurs rapidly, and as such, it is alternately possible to return the reacted prepolymer product back to the original tank after is has undergone the reaction.
In this case, the contents of the road tank or rail tank are fully cycled two to three times to ensure a complete prepolymer reaction and homogeneity of the product. 4) After all polyol and MDI are metered through the in-line reactor, disconnect all chemical lines. 5) Quality Assurance: Collect representative sample for Quality Assurance Testing. The Drum or Tote Reaction process consists of the following steps: 1) Preparation: Place a new MDI drum or tote on a suitable containment pallet.
MDI drums and totes must be stored at a standard temperature prior to completing the pre-polymerization reaction. 2) Preparation: Open the drum or tote. Insert a funnel into the threaded hole on the drum or in the opening on the top of the tote.
Add a specified amount of polyol to the drum or tote. 3) Preparation: Place a compressed air-driven (or electric-driven) drum mixer in the open hole of the drum or tote and ensure that the mixer is safely fixed in place. 4) Reaction: Start agitating the contents of the drum or tote at a moderate speed for a set amount of time. In this step, the polyol disperses quickly, and the MDI reacts rapidly with polyol.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N344847).