The country of origin of a 3D printer and the applicability of certain trade remedies under Section 301.
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated January 2, 2025, you requested a country of origin ruling on behalf of your client, SprintRay Inc. (“SprintRay”). The SprintRay Pro 2 additive manufacturing device, or 3D Printer, is a machine used by dental professionals. It produces three-dimensional products, such as dental models, dentures, retainers and surgical guides through stereolithography apparatus (SLA) technology.
The Pro 2 selectively exposes a light-sensitive liquid resin (photopolymer) to a UV LED light source and optical panel (light mask) to harden and create thin layers of material that build up to form a solid object. The unit measures 15 x 18 x 21 in. and weighs 65 lbs. In Mexico, hundreds of components and materials from China and other countries are assembled into various subassemblies that comprise the finished Pro 2.
First, the system’s motherboard, or “mainboard,” will be manufactured in Mexico using surface-mount technology (SMT). The motherboard is the main circuit board in the Pro 2, which is said to act as the central hub or “brain” of the Pro 2.
Its assembly in Mexico entails the loading of a raw printed circuit board (PCB) with over 900 electronic components from China and various other countries, including diodes, transistors, capacitators, and memory chips, these components being essential to controlling the Pro 2’s key operations including the UV LED, cooling fans, motors, and sensors.
The motherboard also houses the microcontroller unit (MCU), stepper driver, communications processing chipsets and interfaces (Ethernet/WIFI/Bluetooth), and connection interfaces for all major electrical subsystems. This PCBA is then wave soldered and subjected to various testing procedures. This assembly operation takes 39 minutes and requires highly skilled technicians.
Also assembled onto the Pro 2’s motherboard in Mexico is a China-origin Core Board, which is a generic off-the-shelf system-on-module device with an embedded system-on-chip. While the Core Board is an essential component in that it provides basic system components, such as the CPU, storage, and memory, it requires the motherboard to integrate these components into the device's functionality and fully drive the Pro 2’s operations.
After the motherboard is assembled in Mexico, printer proprietary software (designed and developed in the U.S.) is burned onto the motherboard. In addition to loading the software onto the CPU and the firmware onto the MCU, the mainboard also contains an EEPROM, which stores essential information for tracing the mainboard. The EEPROM, CPU and MCU are programmed in Mexico.
In addition to the motherboard, the finished Pro 2 is comprised of several other subassemblies that will be assembled in Mexico from components, subsidiary PCBAs, and other materials originating mainly from China, including: (1) Linear Stage; (2) Print Arm; (3) UV LED Light Source; (4) Back Panel; (5) Housing Front Panel; (6) Print/Build Platform; (7) Optical Panel; (8) Resin Tank; and (9) Accessory Box.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N344910).