The country of origin of wheel bearing kits
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Thus, the country of origin of the wheel bearing and flange with the associated bolts will be Thailand.
- As a result, the country of origin of the wheel bearing kits will be Thailand and China.
Ruling text
In your letter dated January 16, 2025, you requested a country of origin ruling on wheel bearing kits, which you filed on behalf of Sling Automobile Bearing (Thailand) Co., Ltd. The items under consideration are a wheel bearing kit containing a ball bearing (Item Number SLK 1860) and a wheel bearing kit containing a tapered roller bearing (SLK1880). Each kit consists of four separate unassembled components, which include a wheel bearing, a flange with associated bolts, a circlip, and a nut.
According to the bill of materials submitted with your request, the outer and inner rings with raceways as well as the flange are manufactured in Thailand, starting from the importation of raw materials. Additionally, the grease, anti-rust oil, and packing materials used in the assembly are locally sourced in Thailand. The cage, rolling elements, seal ring, dust cover, bolts, circlip, and nut are of Chinese origin and imported to Thailand for further processing.
The production of wheel bearings begins with the importation and cutting of steel pipes to specific dimensions. These pipes are then machined into inner and outer rings using CNC lathes. Following machining, the rings undergo heat treatment to improve their mechanical properties. The rings are then precision-ground to create smooth raceways, followed by superfine grinding to finalize the surface quality. Assembly of the wheel bearings involves installing rolling elements, seals, and greasing.
Each assembled bearing is then tested for vibration and clearance to meet quality standards, followed by cleaning, marking, and anti-rust oil spraying. Flange production starts with hot forging, where the raw material is shaped under high pressure to form the basic flange structure. The forged flanges are normalized in a furnace to refine their grain structure, enhancing their overall strength and durability. Shot blasting follows to clean the surfaces, preparing them for further machining.
CNC lathes and machining centers precisely turn and drill the flanges, including the creation of detailed features such as splines through broaching. The final steps in flange production involve cleaning, inspection, bolt assembly, laser marking for identification, and applying anti-rust oil for preservation. Each flange is then readied for assembly or packaging.
In the final stage, the previously manufactured wheel bearing and flange are packaged together with circlip and nut to form the complete wheel bearing kit. The kits then undergo quality control and testing.
Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N345225).