The country of origin of a power strip
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated January 24, 2025, you requested a country of origin ruling on behalf of your client, Cyber Power Systems, Incorporated. The merchandise under consideration is identified as the Power Strip, Model Number GS60304, which is described as a plastic enclosure with six 3-prong grounded electrical sockets, an electrically protected lighted rocker on/off switch, and a three-foot power cord.
The power strip is used to control and distribute electricity and is rated at 125 VAC at 15 A. In your letter, you state that the power strip consists of the power cord, the three electrical terminals, and the top/bottom plastic housing that are sourced from the Philippines, along with the switch and two short pieces of electrical wire that are sourced from China. In the Philippines, the top/bottom plastic housings are manufactured by injection molding.
The power strip is then assembled by inserting the electrical terminals and switch into the housing, soldering the two wires and the switch onto the terminals and the power cord, then gluing the covers together. The power strip is tested and packaged for export to the United States.
Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v. Friedlander & Co., 27 C.C.P.A. 297, 302 (1940).
Part 134 of the U.S. Customs and Border Protection (“CBP”) Regulations (19 CFR 134) implements the country of origin marking requirements and exceptions of 19 U.S.C. 1304. Section 134.1(b), CBP Regulations (19 CFR 134.1(b)), defines “country of origin” as the country of manufacture, production, or growth of any article of foreign origin entering the United States.
Further work or material added to an article in another country must effect a substantial transformation in order to render such other country the “country of origin” within the meaning of the marking laws and regulations. A substantial transformation occurs when, as a result of manufacturing process, a new and different article emerges, having a distinct name, character or use, which is different from that originally possessed by the article or material before being subjected to the manufacturing process.
See United States v. Gibson-Thomsen Co., Inc., 27 C.C.P.A. 267 (C.A.D. 98) (1940).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N345400).