The country of origin of a water pump
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated January 27, 2025, on behalf of your client, Gates Corporation, you requested a country of origin ruling on a water pump. A Bill of Materials and a description of the assembly processes were provided in the submission. The water pump in question is designed to circulate fluid and is typically belt-driven or gear-driven by the engine. The pump primarily consists of a metal housing or composite casing that is designed to contain an impeller, a pump body, bearings, and seals.
The pump is joined to a pulley to be mechanically connected to the engine's drive mechanism. The pump housing is constructed of cast aluminum or iron. Regarding origin, you describe two scenarios, in which components from various countries are exported to Mexico for final assembly. In scenario one, a Chinese manufactured Water Pump Roughcasting (housing) is placed on a fixture and a Chinese weep cover (end cover) is pressed into one of housing’s openings.
In the following process, a Philippine manufactured integral shaft bearing and a Mexican seal is pressed into the opening of the housing. Next, a Mexican manufactured impeller is pressed onto the bearing shaft. Afterwards, a Chinese manufactured pulley is installed onto the bearing shaft and the housing. Once the components are appropriately placed, the components are bolted in their location. It is noted that during the final assembly processes, an O-ring and a sealing gasket from China are installed respectively.
For scenario two, the final assembly occurs in Mexico and involves the same final assembly processes described in scenario one. The difference is the origin of the pulley, which is of Mexican origin in scenario two. When determining the country of origin for purposes of applying current trade remedies under Section 301, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Here, the final assembly processes completed for both scenarios are rather simple and do not constitute a substantial transformation. Pressing components onto the housing or shaft and securing pressed components in place using bolts are not complex in nature. The processes performed in Mexico do not change the shape, character, or predetermined use of the inputs.
Therefore, like the pump end in Headquarters ruling H313089 (February 16, 2021), we rely on the origin of the impeller to determine the origin, as it is the essential component of the water pump. The impeller provides the force necessary to displace fluid.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N345436).