The country of origin of Silicon Wafers
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Therefore, since a substantial transformation does not occur as a result of the Chinese manufacturing steps, the country of origin of the epitaxial (blank) wafers will be Taiwan for the purposes of applying current trade remedies under Section 301.
Ruling text
In your letter dated January 30, 2025, you requested a country of origin ruling on Silicon Wafers on behalf of your client Wafer Works Epitaxial Corporation. The items concerned are silicon wafers manufactured within Taiwan, which have an epitaxial growth layer added within China. At the time of manufacture within Taiwan, the wafers are almost 100% silicon and are doped for use in electronics. The wafers are doped with either boron, phosphorus, or arsenic based on the customer’s request and design.
Boron is used for P-type doping to provide an excess of positive charge carriers called “holes.” Phosphorus and arsenic are used for N-type doping to provide an excess of negative charge carriers. The silicon epitaxial layer is also doped, with the same chemical element that is used to dope the wafer. Boron doped silicon wafers from Taiwan undergo boron doped epitaxy in China (homoepitaxy).
Similarly, phosphorus doped silicon wafers from Taiwan undergo phosphorus doped epitaxy in China, and arsenic doped silicon wafers from Taiwan undergo arsenic doped epitaxy in China. As the epitaxial layer is doped with the same chemical element as the base wafer, (i.e. boron doped wafer with epitaxial layer of boron doped silicon) there is no change in the electrical attributes of the wafer. Once the epitaxial layer is added, the wafer does not incorporate a positive/negative (p/n) junction.
The positive/negative(p/n) junction is formed during downstream customer fabrication.
The manufacturing steps performed within Taiwan: Ingot Formation: Crystal Growth End Cropping Ingot Inspection Section Cropping OD Grinding Wafer Manufacturing: Slicing the Silicon Ingot Measurement and Inspection Crude Edge Grinding Lapping of the Wafer Fine Edge Grinding Edge Profile and Geometry Measurement Double Side Grinding Measurement and Inspection Hard Laser Marking Caustic Etching and Cleaning Heat Treatment Double-Sided Polishing Edge Polish Chemical-Mechanical Polishing (CMP) Geometry and Flatness Measurements Appearance Inspection Final Cleaning Surface Scan Sorting RFID Writing Packaging and Shipment to China for epitaxial growth process The process that is to occur in China involves adding a silicon epitaxial layer to the wafer substrate.
Autoepitaxy (or Homoepitaxy) is the extension of the substrate lattice by the overgrowth of a layer of identical material (e.g., Si in Si, or GaAs in GaAs) with no problem of compatibility or mismatch. The manufacturing steps performed within China: Epitaxy Process: Epitaxy refers to the growth of a single crystal layer on the substrate wafer. This is achieved by application of thin-film deposition.
Visual Inspection Measurements for Thickness, Resistivity, and Flatness Final Cleaning Particle Measurement Packaging/ Shipping When determining the country of origin for purposes of applying current trade remedies under Section 301, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N345524).