The tariff classification and country of origin of bulkhead assemblies
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for the LTCS Bulkhead Assembly will be 7305.31.4000, HTSUS, which provides for other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel: other, welded: longitudinally welded: other: of iron or nonalloy steel.
Ruling text
In your letter dated February 10, 2025, you requested a tariff classification and country of origin determination ruling on behalf of your client, ITP SA. The products under consideration are identified as two types of bulkhead assemblies: (1) the 36% Nickel Alloy Bulkhead Assembly (“36NiFe Bulkhead Assembly”) and (2) the Low-Temperature Carbon Steel Bulkhead Assembly (“LTCS Bulkhead Assembly”).
You state that the bulkhead assemblies are a type of cryogenic insulated pipeline system which consists of pipe in an insulated pipe-in-pipe (PIP) pipeline system.
The 36NiFE Bulkhead Assembly consists of a cold-rolled longitudinally welded inner pipe with an outside diameter (OD) of 865.2 mm, a cold-rolled welded outer pipe with an OD of 1018 mm, a cold-rolled welded outer pipe sleeve with an OD of 1168.4 mm, concentric reducers, all of which are made from Invar 36% nickel alloy steel, steel transition pieces, Izoflex® pipes, and a stainless steel Inline Bulkhead. Based on the information provided, the nickel alloy pipes predominate by weight over the other components.
The LTCS Bulkhead Assembly is comprised of a cold-rolled longitudinally welded inner pipe made from Invar 36% nickel alloy steel with an OD of 712.8 mm, a cold-rolled longitudinally welded outer pipe with an OD of 863.6 mm, a cold-rolled longitudinally welded outer pipe sleeve with an OD of 1016 mm, concentric reducers, all of which are made from carbon (nonalloy) steel, steel transition pieces, Izoflex® pipes, and pipes and an Inline Bulkhead made of stainless steel.
You indicate that the nonalloy steel components (i.e., outer pipes, concentric reducers, and outer pipe sleeve) account for over 52% of the total weight of the LTCS Bulkhead Assembly.
The applicable subheading for the 36NiFe Bulkhead Assembly will be 7305.31.6090, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel: other, welded: longitudinally welded: other: of alloy steel, other. The rate of duty will be free.
The applicable subheading for the LTCS Bulkhead Assembly will be 7305.31.4000, HTSUS, which provides for other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel: other, welded: longitudinally welded: other: of iron or nonalloy steel. The rate of duty will be free. Duty rates are provided for your convenience and are subject to change.
The text of the most recent HTSUS and the accompanying duty rates are provided at https://hts.usitc.gov/. You have asked for a country of origin determination for purposes of marking and for purposes of the applicability of a trade remedy or trade program. Regarding the country of origin for marking purposes, Section 304 of the Tariff Act of 1930, as amended (19 U.S.C.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N345836).