The country of origin of LED flashlights
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated February 11, 2025, you requested a country of origin ruling on LED flashlights for marking purposes. The merchandise is two models of flashlights, identified as the ABC and DF. The ABC is in an oval shape and the DF is in a cylindrical shape. The LED flashlights each consist of a light head and a plastic housing. The light head, depending on the model, comprises the components, e.g., a lens retainer, lens, reflector, bezel, metal core board, and PCBAs (printed circuit board assemblies).
The housing comprises a plastic body, switch and an end cap, etc. The final assembly will occur in the United States. The factory(ies) in the United States will import all of the components or parts from various countries, e.g., China, Vietnam, etc., and assemble them with the U.S.-origin PCBAs (which form the LED light source) to make the finished flashlights. In the presented manufacturing processing scenario, the PCBAs are the only components made in the United States.
The assembly process in the United States begins with the production of the PCBAs, in which, the PCBs or PWBs (printed wiring boards) are populated with the electronic components via the SMT (surface mount technology) process. The SMT process involves mounting the main integrated circuit, as well as various capacitors, transistor, varistors, connectors, fuse and diodes, etc. In particular, the PCBAs (for the light heads) are populated with the LEDs to make the light source during the process.
In the final assembly, the process for model ABC is as follows: assemble main PCBA and outer body case, assemble heatsink assembly, apply glue to the switch cover, assemble flashlight body and heatsink, glue switch cover to body, test the flashlight to ensure proper functionality, then attach belt clip to body, appearance quality check, and finally package for delivery.
Similarly, the process for model DF is as follows: assemble bezel assembly, test bezel assembly and adjust as necessary, assembly body portion, assembly bezel and body together, additional function test, appearance quality check, and finally package for delivery.
Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v. Friedlander & Co., 27 C.C.P.A. 297, 302 (1940). Part 134 of the U.S.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N345862).