The country of origin of a thin-film transistor (TFT) liquid crystal display (LCD) module
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated February 13, 2025, on behalf of JDI Display America Inc., you requested a country of origin ruling. The merchandise under consideration is a thin-film transistor (TFT) liquid crystal display (LCD) module, part number LPM096G522A. This display is designed for integration into automotive systems for the rearview mirror.
Its primary operational functions encompass the following: (1) signal reception, inclusive of Low Voltage Differential Signaling (LVDS); (2) signal distribution to individual pixels; and (3) image displaying. Based on the information provided, the subject TFT-LCD module does not contain any video signal conversion capabilities. In Japan, the following steps occur.
First, the process starts with a glass substrate, which entails multiple steps in the chemical vapor deposition machines to build a TFT array structure on the substrate. The next step consists of the color filter built-up. Then, the LCD panel is filled using a one-drop fill (ODF) process, applied to the entire TFT array substrate, in which the liquid crystal material is compressed between the TFT array sides, and the color filter glass substrate is added and aligned on top.
This process creates a sheet of TFT-LCD cells that will later be cut into individual cells. In China, the substrate is cut into “chips” (individual LCD panels) and the module is assembled. The assembly consists of taking the LCD cell (the "chip"), and affixing driver integrated circuits (ICs), adding the polarizers, the flexible printed circuit(s) (FPC(s)), a backlight, and a frame. Lastly, it passes through outgoing quality testing.
When determining the country of origin for purposes of applying current trade remedies under Section 301 , the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). Accordingly, it is our opinion that the completed TFT-LCD cells, regardless of where they are cut to size, are the dominant component that provides the character of the finished flat panel display modules.
The complex manufacturing process performed in Japan renders the end-use of the cells predetermined, as they cannot be used for any other purpose than a display. Further, the assembly processes performed in China would not substantially transform the cells into new and different articles of commerce with a name, character, and use distinct from that of the exported good. Therefore, based upon the facts presented, the country of origin of the subject TFT-LCD module is Japan.
The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N345963).