The tariff classification and eligibility of 9802.00.6000 of certain wood and self-tapping screws manufactured from raw materials in the United States and returned to the U.S. for further processing
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated February 26, 2025, you requested a tariff classification ruling on behalf of your client, OMG Building Products LLC (OMG). In particular, you are seeking a determination as to whether certain wood and self-tapping screws manufactured in the U.S. qualify for a reduction in duty under subheading 9802.00.6000, Harmonized Tariff Schedule of the United States (HTSUS).
The products to be imported are iron or steel wood screws and self-tapping screws that are produced in the U.S. at the OMG Building Products LLC manufacturing facility, in Agawam, MA. OMG uses raw material wire coil and then cuts the wire to length, forms the head and drive system recess, pinches the point, and rolls the thread. The fasteners are then exported to Canada where they are hardened and tempered in electric heat-treating furnaces to improve their hardness and strength.
The fasteners are then returned to the U.S. where they undergo the further process of electroplating to enhance their corrosion resistance and improve surface properties. Finally, the fasteners are packaged into a finished good to be sold to customers.
You state the fasteners are imported under subheading 7318.12, HTSUS, which provides for Other wood screws, with a rate of duty of 12.5% or under subheading 7318.14, HTSUS, which provides for Self-tapping screws with a rate of duty of 6.2% for those having shanks or threads with a diameter of less than 6 mm, and 8.6% for those with a diameter of 6 mm or more. You note that both these products currently meet the USMCA free trade agreement.
You have requested a determination on the eligibility of subheading 9802.00.6000, HTSUS, which provides a partial duty exemption for: [a]ny article of metal . . . manufactured in the United States or subject to a process of manufacture in the United States, if exported for further processing, and if the exported article as processed outside the United States, or the article which results from the processing outside the United States, is returned for the United States for further processing.
Subheading 9802.00.6000, HTSUS, therefore imposes four requirements: (1) the merchandise must be an article of metal; (2) the metal must either be manufactured in the United States or subject to a process of manufacture in the United States; (3) the metal must be exported for further processing; and (4) the metal must be returned to the United States for further processing.
For purposes of subheading 9802.00.6000, HTSUS, “metal” includes “base metals enumerated in note 3 to section XV,” which in turn includes iron or steel. Therefore, the wood screws and self-tapping screws will qualify as an “article of metal” satisfying the first requirement. The wood and self-tapping screws are manufactured by OMG Building Products LLC, in Agawam, MA from wire coil.
Manufacturing steps include cutting the wire to length, forming the head and drive system recess, pinching the point, and rolling the thread. These processing steps satisfy the second requirement that the metal must either be manufactured in the U.S. or subject to a process of manufacture in the U.S.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N346311).