The tariff classification and country of origin marking of two unassembled gate latches.
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The country of origin ruling for the purposes of Section 301 and IEEPA duties request will be considered by our Regulations and Rulings directorate at Customs and Border Protection Headquarters and will be issued under separate cover.
- Your question regarding country of origin for the duty purposes of Section 301 and IEEPA will be addressed under separate cover.
Ruling text
In your letter dated March 7, 2025, you requested a binding tariff classification and country of origin marking ruling on behalf of your client D&D Technologies. The request addressed two unassembled gate latches. In your letter, you also requested a country of origin ruling for the purposes of Section 301 duties on the two unassembled gate latches.
The country of origin ruling for the purposes of Section 301 and IEEPA duties request will be considered by our Regulations and Rulings directorate at Customs and Border Protection Headquarters and will be issued under separate cover. The products under consideration are described as a Toggle Latch (T-Latch) and a Q-bolt Latch (Q-Latch). Both of these products are latches for a gate.
The T-Latch consists of three pieces of plastic housing (cover, backing plate, and catch), a stainless-steel T-latch striker pin/striker bolt, and mounting screws. The T-latch striker pin consists of two pieces of unthreaded metal rod that are pressed together so that they form a T-shape. The Q-Latch consists of two pieces of plastic housing, a stainless-steel Q-bolt drop rod, and mounting screws.
The Q-bolt drop rod is a 24-inch stainless-steel unthreaded rod that is chamfered on both ends and bent into an almost complete U-shape on one of the ends. You state that both of these latches are imported complete and together but unassembled. The consumer will assemble the components of the latch on their specific gate. For each latch the steel component functions to hold the gate closed and is the most expensive component.
You state the stainless-steel T-latch striker pin and Q-bolt drop rod are made in China; the steel screws are made in Taiwan; and the plastic housings, the packaging bags, stickers, and instructions are made in Australia. The T-latch striker pins, Q-bolt drop rods, and screws are shipped to Australia where workers package them together with the plastic housings for exportation to the United States. Classification under the HTSUS is made in accordance with the General Rules of Interpretation (GRIs).
GRI 1 provides that the classification of goods shall be determined according to the terms of the headings of the tariff schedule and any relative section or chapter notes. If the goods cannot be classified solely based on GRI 1, and if the headings and legal notes do not otherwise require, the remaining GRIs 2 through 6 may then be applied in order. Since the subject articles are imported unassembled, GRI 2(a) of the HTSUS applies.
Under GRI 2(a) of the HTSUS, “Any reference to an article shall be taken to include a reference to that article incomplete or unfinished, provided that, as presented, the incomplete or unfinished article has the essential character of the complete or finished article.
It shall also include a reference to that article complete or finished (or failing to be classified as complete or finished by virtue of this rule) entered unassembled or disassembled.” The subject articles are complete unassembled gate latches and will thus, by virtue of GRI 2(a), be classified as complete and assembled gate latches.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N346575).