The tariff classification of a servo tandem press line, base plates, and a front-of-line sound wall from Japan
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The rate of duty will be 4.4% ad valorem.
- The rate of duty will be 4.7% ad valorem.
Ruling text
In your letter dated March 12, 2025, you requested a tariff classification ruling regarding a servo tandem press line from Japan. In subsequent correspondence, you stated that base plates and a front-of-line sound wall from Japan would be imported into the United States on separate entries. Technical information was submitted with your request and in subsequent correspondence.
The first item under consideration is described as a servo tandem press line (Model # H5FTL) used to form automotive parts from flat sheet metal blanks. The automotive parts include, but are not limited to, body, hood, and door panels.
As described, the press line comprises six interconnected component groups: 1) 2400-ton H4FL press with die cushion, 2) 1200-ton H4FL press, 3) three 1000-ton H4FL presses, 4) front-of-line blank destack equipment (with optional washer and oiler machines, if equipped), 5) product feeder equipment, and 6) the press line perimeter sound wall. In your letter, you clarify that the product-specific tooling (upper and lower dies) is supplied separately by your customer and not included with the servo press line.
Beginning at the front-of-line area, operators load stacks of blank workpieces into loading areas. Next, a gantry equipped with selectable vacuum cups moves the workpiece onto a conveyor and it travels to optional washer and oiler machines or a bypass conveyor. At that point, the workpieces are scanned by a camera for positioning and centered by robots to a desired position. Once positioned, the first feeder moves the workpiece to the first servo press.
During operation, the workpiece is pressed by five servo presses, successively. In addition to the first feeder, there are four feeders responsible for transferring the workpiece from one press to the next and one feeder for exit to an exit conveyor (not included).
Although the product-specific shaping of the workpiece is determined by the shape of the dies and not the press line equipment itself, the movements of the workpiece through the press line, the actions of the feeders, and the motions performed by each servo press are coordinated and controlled by a central computer unit. Each of the five servo presses is composed of a crown, connecting rods, slide, slide plate, bolster plate, bolster, and bed.
The crown sits at the top of the press and contains the main servo motors, external gears/reducers, internal drive gears, and connecting rods of the servo drive system. The connecting rods run vertically to the slide below. The slide and slide plate hold the upper die. The bed sits at the bottom of the press and supports the bolster, bolster plate, and lower die. Based on a predetermined motion program, the servo drive system moves the slide vertically into the workpiece with great force.
The pressures exerted on the workpiece from the slide above and the supporting bolster below shape the workpiece as determined by the upper and lower dies. The next items under consideration are described as base plates which anchor the press line to the concrete footing below.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N346701).