The tariff classification of clothes hangers from China
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for the five styles of hangers will be 4421.10.0000, HTSUS, which provides for “Other articles of wood: Clothes hangers.” The column one, general rate of duty will be 3.2 percent ad valorem.
Ruling text
In your letter, dated March 13, 2025, you requested a tariff classification ruling for five styles of clothes hangers. In lieu of samples, photos and detailed descriptions were submitted for our review. Item 1 is a hanger designed to hold both an upper body garment and a lower body garment simultaneously, for example a suit jacket and pants. The hanger is made primarily of wood with a top section that slopes down on each side and is notched near each end, and a metal top hook.
Suspended with metal fasteners across the bottom is a wooden rod to fold pants over. You state that the wood portions make up approximately 75 percent of the cost and weight of the finished hanger. Item 2 is a hanger designed to hold pants. A wooden horizontal cross piece with a wire top hook suspends a parallel wooden rod a couple of inches below. Metal wire connects the pieces. Per your submission, the wooden elements make up approximately 70 percent of the cost and weight of the finished hanger.
Item 3 is a hanger designed to hold both an upper body garment and a lower body garment simultaneously. As with Item 1, the hanger is made of a wooden top portion that slopes down on each side and is notched near the ends. A horizonal metal bar with two metal clips is attached below to clip a skirt or pants. Per your submission, the wood accounts for approximately 65 percent of the cost and weight of the finished hanger. Item 4 consists of a wooden horizontal cross piece with a wire top hook.
A metal wire is attached that runs parallel to the wooden piece a couple of inches below and has two metal clips attached to hold a skirt or pants. You state that the wooden elements make up approximately 50 percent of the cost and 55 percent of the weight of the finished hangers. The remainder of the cost and weight is the metal components. Item 5 resembles Item 4, except the clips are plastic.
Per your submission, the wood makes up approximately 55 percent of the cost and weight of the finished hanger, the metal makes up approximately 25 percent, and the plastic makes up the remaining 20 percent. You propose classification of the hangers in subheading 4421.10.0000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for, “Other articles of wood: Clothes hangers.” The hangers are composite articles made of wood, metal, and in the case of item 5, some plastic.
Classification of merchandise under the HTSUS is in accordance with the General Rules of Interpretation (GRIs).
GRI 3(b) provides that composite articles consisting of different materials or made up of different components shall be classified as if they consisted of the material or component which gives them their essential character, which may be determined by the nature of the material or component, its bulk, quantity, weight, or value, or by the role of a constituent material in relation to the use of the article.
In the case of Items 1, 2, and 3, we agree that the wood is the most essential component in terms of role and also predominates by weight and cost. For Item 4, the wood again predominates by weight and plays an indispensable part in the construction of the hanger.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N346733).