The country of origin of a double flanged wheel hub unit with ball bearings
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Since the flanges in the current ruling are made in Thailand and the spline and raceway components are also grinded in Thailand, the country of origin of the entire wheel hub unit incorporating ball bearings (Part Number 513288) will be Thailand.
Ruling text
In your letter dated March 18, 2025, you requested a country of origin ruling on the double flanged wheel hub unit incorporating ball bearings, which you filed on behalf of Hubble Autoparts Manufacturing (Thailand), Co. Ltd. The merchandise under consideration is a Double Flanged Wheel Hub Unit Incorporating Ball Bearings (Part Number 513288), which is used in passenger vehicles. The assembly features an outer flange and an inner flange, which work together to support the wheel and axle connection.
The outer flange is typically bolted to the wheel, providing a secure mounting point, while the inner flange connects to the axle, via a splined interface for torque transmission. Between the flanges, the rotating body, which includes the ball bearings, allows for low-friction rotation of the wheel. The assembly also integrates an anti-lock braking system (ABS) sensor, which monitors wheel speed for anti-lock braking functionality.
You state that the outer and inner flanges are produced in Thailand from raw steel bars. The bars undergo hot forging, normalizing, shot blasting, turning 1, heat treatment, turning 2 and 3, and drilling. The outer flange then undergoes additional outer diameter grinding, raceway grinding, and superfine grinding. The inner flange undergoes additional splining, raceway grinding, and superfine griding.
The outer and inner flanges are then assembled together in Thailand with the Chinese sourced inner ring, steel balls, cage, seal ring, ABS sensor, and bolts. Finally, the unit is greased with the Thai sourced grease and anti-rust oil and packaged for shipment to the United States. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
It appears that this office has already ruled on a similar scenario in N346375, dated March 18, 2025. In that ruling, we stated that the splining feature of the inner flange gives the wheel hub unit functionality beyond a mere bearing.
Furthermore, we cited HQ rulings (e.g., HQ 562528, dated December 10, 2002), where CBP stated that the country of origin of the wheel hub assembly is controlled by where the races with precision raceways are formed and finished into the articulating surfaces of the flanges and inner ring.
Since the flanges in the current ruling are made in Thailand and the spline and raceway components are also grinded in Thailand, the country of origin of the entire wheel hub unit incorporating ball bearings (Part Number 513288) will be Thailand. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N346900).