The country of origin of an impact drill
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated March 19, 2025, you requested a country of origin ruling regarding an impact drill on behalf of your clients Positec USA, Inc. and RW Direct, Inc. Technical information was provided with your submission and in follow-up correspondence. The item for consideration is described as a battery-powered impact drill (Item # WU377) designed for drilling holes in wood and steel.
As described, the fully assembled impact drill has 12 primary features: chuck, torque adjustment ring, two-speed gear control, forward/reverse rotation control, soft grip handle, battery pack, belt hook, battery capacity indicator, battery pack release button, light-emitting diode (LED) light, on/off switch, and bit clip. You clarify that drill bits are not included with the imported product. Furthermore, some models include a battery pack and battery pack release button, while others do not.
The major functional components are a printed circuit board assembly (PCBA), a motor (rotor and stator), and a gearbox which are manufactured and combined into a subassembly in Vietnam. As you describe, the gearbox contains components that deliver rapid and forceful rotational impacts during operation. These impacts assist the drill’s rotation when encountering resistance in a workpiece.
After a Chinese-origin chuck is assembled onto the head of the gearbox in Vietnam, the four combined components are shipped to China for final assembly with 45 additional Chinese-origin components, including, but not limited to wires, screws, foam pad, labeling, and handle body. Assembly begins with the gearbox in Vietnam. The gearbox interior is composed of multiple layers of gears, with each layer consisting of three to four gears.
During assembly, gears are placed into the gearbox in a specified arrangement that, when combined, work to reduce the speed and increase the torque of the drill. At this stage, the impact components are also installed into the gearbox. Next, a gear is installed onto the motor head. After that, the motor gear is inserted into the gearbox. This connection creates a motor and gearbox subassembly to transmit the motor’s rotation into the gearbox and drive the rotation of the gearbox shaft.
At that point, the PCBA is connected to the rear end of the motor. The PCBA connects the power supply and controls the starting and stopping of the drill. Assembly in Vietnam concludes with the chuck installation onto the shaft of the gearbox with screws. The chuck’s primary function is to hold a drill or screwdriver bit during operation.
In your letter, you state that the production and assembly of the PCBA, motor, and gearbox in Vietnam includes the work of electricians, product engineers, test engineers, and workers who are specially trained to ensure the product meets quality standards and specifications. In China, assembly continues with the installation of a nut into the drill casing. Next, the motor and gearbox subassembly are placed into the drill casing with other components.
Following that, the PCBA, switch, and wires are placed into the casing. The two halves of the casing are attached together and fastened with screws.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N346961).