The country of origin of a water pump
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated March 25, 2025, on behalf of Gates Corporation, you requested a country of origin ruling of a water pump for the purpose of Section 301 Trade Remedies. A description of the assembly processes was provided in the submission. The water pump at issue consists of an aluminum or iron housing that encases an impeller, bearings, seals, and a pulley. The size of the water pump corresponds to its motor vehicle application.
In regard to origin, you describe two scenarios: in scenario one, the final assembly of the water pump occurs in Mexico and in scenario two, the final assembly of the water pump occurs in China. The final assembly for both scenarios consists of the following processes. A Chinese manufactured Water Pump Roughcast (housing) is placed on a fixture and a Chinese weep cover (end cap) is pressed into one of housing’s openings.
In the following process, a Chinese manufactured integral shaft bearing and a seal from China are pressed into the opening of the housing. Next, an impeller manufactured in the United States is pressed onto the bearing shaft. Afterwards, a Chinese manufactured pulley is installed onto the bearing shaft and the housing. Once the components are appropriately placed, the components are bolted in their location.
It is noted that during the final assembly processes, an O-ring and a sealing gasket from China are installed in the appropriate locations. When determining the country of origin for purposes of applying current trade remedies under Section 301, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (HQ) H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Here, the final assembly processes completed for both scenarios are rather simple and do not constitute a substantial transformation.?Pressing components into the housing or onto a shaft and securing them in place using bolts is not complex in nature.?The processes performed in Mexico or China do not change the shape, character, or predetermined use of the inputs.
Therefore, like the pump end in HQ H313089, dated February 16, 2021, we look to the origin of the impeller to determine the origin, as it is the essential component of the water pump. The impeller provides the force necessary to displace fluid. As the impeller is of United States origin in both scenarios, the country of origin of the finished water pump for both scenarios is the United States.
The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations (CFR), Section 177.9(b)(1).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N347081).