The country of origin of crawler hydraulic excavators
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Thus, based on the totality of the circumstances, the country of origin of the SY50 and SY60 series of crawler hydraulic excavators will be Indonesia.
Ruling text
In your letter dated March 26, 2025, you requested a country of origin ruling on behalf of your client, PT SANY Indonesia Machinery. The merchandise under consideration is identified as the SY50 crawler hydraulic excavator and the SY60 crawler hydraulic excavator. The SY50 and SY60 series of excavators are described as self-propelled earthmoving machinery with a tracked undercarriage, a revolving superstructure, and a mechanical boom and arm.
Compared to the SY50, the SY60 is larger in size, and has a greater digging depth and gross power. Both models will be imported into the United States without a primary attachment but will be equipped with a bulldozer blade attached to the undercarriage.
You state that the subject hydraulic excavators will be manufactured in Indonesia by the same workers, on the same production line, and follow the same assembly steps as described in New York ruling N337356, dated January 24, 2024, which concerned the SY35 hydraulic excavator. The process begins with manufacturing the key structural assemblies, identified as the boom, arm, lower frame, and upper frame. All the key structural assemblies and their metal forms will be created in Indonesia.
The upper frame is described as the structural foundation used to support the boom, arm, engine, cab, hydraulic system, and control system. The upper frame will sit atop the lower frame, which will contain the crawler tracks and drive motor. The upper frame is created from various metal forms, shapes, beams, supports, and plates. These are referred to in your submission as mounting plates, cross beams, cover plates, etc.
The process involves incrementally joining the metal forms across multiple operational steps described as fitting, drilling, welding, polishing, and sanding. After an intermediate weldment is created, it undergoes further machining, which involves boring rough and fine motor holes, milling support rings, drilling the slewing support, chamfering portions of a rotary support ring, and tapping threaded holes. The assembly is then shot blasted, painted, and protected with a rustproofing treatment.
The construction of the lower frame assembly follows a similar process. The operational production steps are described as orienting, aligning, combining, and welding various supporting pieces to U-beams to create a pair of left and right beam assemblies. The beam assemblies are then combined with motor mounts, motor blocks, brackets, reinforcing plates, and supports to create a track beam subassembly.
Next, an X-frame, walking frames, travel frames, structural member frames, and other components are mounted on top of the track beam subassembly to form a single unified lower frame assembly. The boom and arm are components of the mechanism that will control the end-attachment of the excavator. To create the boom assembly, robotic welding stations join various metal shapes and forms, identified in your submission as ear plates, bow plates, spacer plates, side panels, base plates, supports, etc.
Using a similar process, robotic welding stations are used to create the arm assembly.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N347130).