The country of origin of radio frequency identification (RFID) labels
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated March 31, 2025, on behalf of Guangzhou Confidex Electronics SCI, you requested a country of origin ruling. The merchandise under consideration is RFID Labels, referred to as High Frequency Labels (HF Labels), Ultra-High Frequency Labels (UHF Labels), and On Metal Labels (OM Labels). The HF labels (item # NFC PCB SLIX2) are used in secure transactions, authentication, and access control.
The UHF Labels (item # Cruiser Windshield Getipass M780) are designed for supply chain and inventory management. The OM Labels (item # Silverline Micro II MR6-P FCC Zebra PN 10026764) are for use on metal surfaces and incorporate materials to prevent signal interference. Each of the subject RFID labels contains a unique identification code and is used to store and transmit data.
Moreover, the subject identification labels are devices that consist of three main components: a microchip, an antenna, and an adhesive paste. There are two scenarios in question: Scenario 1: RFID Labels are assembled in China using Taiwan-origin MR6-P microchips; and Scenario 2: RFID Labels assembled in China using Malaysia-origin MR6-P microchips. As per the information provided, the microchip, model MR6-P, is manufactured in Malaysia or Taiwan.
The microchip is an integrated circuit (IC) that contains non-volatile memory. During fabrication, specific programming is embedded into the microchip to handle communication protocols, which allow the labels to communicate with RFID readers by reflecting and modulating radio signals. The microchip, which includes unique identifiers, stores and transmits data. The antenna is made in China.
The antenna is printed, etched, or stamped onto a non-conductive substrate, creating the structure that captures and transmits radio signals. It receives signals from an RFID reader and sends data back from the microchip. The paste, which bonds the microchip to the antenna, is produced in Germany. The paste is shipped to China. The production process for HF Labels, UHF Labels, and OM Labels includes microchip fabrication, antenna production, bonding, assembly, and final testing.
The production process for the RFID labels begins with the fabrication of the microchips. These microchips are made in Malaysia or Taiwan depending on the manufacturer’s facility location. The construction of these microchips involves semiconductor manufacturing techniques, such as the creation of silicon wafers, photolithography, etching, and doping. During production, each microchip is assigned a unique identifier number or UID that can be authenticated and traced.
The assembly process in China consists of the antenna material being unwound from a supply reel. Next, the Chinese antenna and the Malaysian or Taiwanese recorded microchips are inspected and cleaned in preparation for a bonding process. Then, the German paste is applied to the contact points on the antenna. Using "pick-and-place" machines, the microchips are positioned onto the antennas, and the paste is applied. After that, a curing oven is used to bond the components together, resulting in a dry inlay.
The microchips are then loaded into the bonding machine in the form of a wafer.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N347234).