The country of origin of hydraulic floor jacks
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Thus, based on the totality of the circumstances, the country of origin of the steel floor jack (model THF3-26XHB), the aluminum floor jack (model THA3-3XTB), and the aluminum-steel floor jack (model THA1.5-16CX), will be Thailand.
Ruling text
In your letter dated March 31, 2025, you requested a country of origin ruling on behalf of your client, Torin (Thailand) Co., LTD. The merchandise under consideration involves three different models of hydraulic floor jacks, identified as a steel floor jack (model THF3-26XHB), an aluminum floor jack (model THA3-3XTB), and an aluminum-steel floor jack (model THA1.5-16CX). The steel floor jack is designed for heavy-duty industrial or automotive applications.
It has a full steel construction and a maximum load capacity of three tons. The aluminum floor jack is designed for portability and uses aluminum components to reduce its overall weight. This model has a maximum load capacity of three tons. The aluminum-steel floor jack balances the strength of steel and the reduced weight of aluminum and has a maximum load capacity of one and a half tons.
All three models will be manufactured at the same facility in Thailand using components and materials sourced from Thailand and China. The overall operational steps for all three models will be largely the same, starting with creating metal forms, turning them into component parts, and ending with final assembly. A separate scenario was presented for each model. Steel Floor Jack (THF3-26XHB) The steel hydraulic jack will be produced in Thailand using Chinese and Thai components.
The process begins with creating the hydraulic power unit, which is described as the mechanism that provides the power to lift an object. The main components of the power unit include a base, top cap, cylinder, outer sleeve, piston rod, piston head, coupling connector, pump core, and pump body. The power unit’s base, top cap, and piston head are cast from raw steel scrap sourced from Thailand. Raw steel scrap is melted and further processed by spheroidization and inoculation treatments at a Thai foundry.
Simultaneously, workers create and prepare sand molds, including the cores required for each casting. The liquid metal is poured into the sand mold and left to cool and solidify. The resultant castings are then machined, threaded, and further drilled to create oil passages for the base casting. The power unit’s cylinder is created from material lengths of seamless pipe while the outer sleeve is created from material lengths of welded pipe. The cylinder will have threads machined into both ends.
The outer sleeve will have one chamfered end and a smooth inner surface with drilled holes on its opposite end. The piston rod is manufactured from material lengths of round steel bar that are cut to length, roughly ground to remove burrs or excess material, then subjected to further machining, including step turning and drilling. The pump core and pump body are sourced as finished components from China.
The individual components are systematically combined with the power unit’s base, starting with the cylinder, outer sleeve, piston rod, top cap, and so forth. Sealing rings are added, bolts are used to secure the components in place, hydraulic fluid is added, and the power unit is load tested. The structural components, identified as the lifting arm assembly and frame assembly, are manufactured in Thailand from steel sheeting.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N347256).