The country of origin of LED lights
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Therefore, the country of origin of the LED disk lights and UFO high bay lights will be Vietnam for purposes of marking, as well as for applying current trade remedies under the 301 tariffs, IEEPA tariffs and reciprocal tariffs.
Ruling text
In your letter dated April 14, 2025, on behalf of Parmida LLC, you requested a country of origin ruling on two categories of LED lights for purposes of marking, as well as for applying current trade remedies under the 301 tariffs, IEEPA tariffs and reciprocal tariffs. The merchandise at issue is identified as disk lights and UFO high bay lights.
The disk lights have three models: (1) 1CCT (one color) which has no switch, (2) 3CCT which has a smaller switch to fit three color temperatures, and (3) the 5CCT which has a larger switch to fit five color temperatures. These disk lights are modern fixtures with a flush mount design. They can be installed with recessed can housing or a junction box. The UFO high bay lights will be available in two power variants, each offered as a separate model. The two power variants will be 150W and 240W.
These lights are circular, high-powered fixtures designed for spaces with high ceilings. They are typically hung using a hook from the ceiling and plugged into a standard outlet.
The submitted materials indicate that the manufacturing process in Vietnam consists of using the components and materials imported from China to make the printed circuit boards (PCBs), in which the electronic components and the LEDs are populated on the PCB substrates to fabricate the LED light source for the subject LED lights via the SMT (surface mount technology) process.
The manufacturing processing steps in the Vietnam factories include cutting, drilling, lamination, vertical copper plating (VCP), D/F Exposure (dry film exposure), etching, automated optical inspection (AOI), photo solder resist (PSR), Silk screen, router v-cut, punching, Organic Solderability Preservative (OSP) and testing.
Specifically, the SMT process involves mounting the main integrated circuit, as well as various capacitors, varistors, resistors, fuse, diodes, inductors and switches etc., which goes through the steps of inkjet printing, SPI (solder paste inspection), chip mounting, reflow soldering, high-low current test, parallel transplanting, cooling, gluing, AOI (automated optical inspection), lens chip mounting, electrical testing, darkroom testing, visual inspection, loading, etc.
After SMT operations are completed, the finished PCBs will be shipped to the factory in China for final assembly where the PCBs will be combined with the Chinese-origin components and materials to make the finished lights. The major Chinese-origin components and materials are the lamp housings, diffusion plates, LED lenses, electric wires, bride reflectors, silicon plates, screws and washers, hear-conducting pare, and thermal conductive adhesive.
For the disk lights, the final assembly will include labelling on bottom plate, input wire sleeve heat, solder the input wire on PCB board, glue and fix the solder, apply thermal conductive silicone, position PCB/diffuser, lock PCB/diffuser with screw, fix diffuser, and testing.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N347800).