The country of origin of radio frequency (RF) front-end-modules. Correction to Ruling Number N346922
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Therefore, since a substantial transformation does not occur as a result of the back-end processing that takes place within China, the country of origin of the finished RF FEM integrated circuit module will be the United States; therefore, trade remedies under Section 301 will not apply. ?
Ruling text
This replaces Ruling Number, N346922, dated April 2, 2025, which contained a clerical error. The name of the requesting party was erroneously omitted from the ruling decision. A complete corrected ruling follows. In your letter dated March 18, 2025, you requested a country of origin ruling on behalf of your client, GlobalFoundries Inc. and its U.S. based subsidiaries, GlobalFoundries U.S., Inc. and GlobalFoundries U.S. 2 LLC. The items concerned are referred to as radio frequency (“RF”) front-end-modules (“FEM”).
These devices are silicon on insulator (“SOI”) RF FEM integrated circuits (“ICs”). They are used in cellular and Wi-Fi applications. Each RF FEM contains multiple elements such as, transceivers, filters, amplifiers, oscillators and mixers. The final product is a packaged integrated circuit which means that the IC chip has been mounted and encased in a format enabling their direct interface with other hardware.
The package serves as a mechanical carrier of the integrated circuit die, protects the die against environmental effects (such as shock or moisture), and allows for the connection of the die to the customer’s printed circuit board to which it becomes attached in downstream manufacturing.
The RF FEM integrated circuit manufacturing process is divided into three basic phases: (1) the front-end manufacturing process, which occurs in the United States, (2) the back-end package assembly process, which occurs in China, and (3) the final testing and finishing, which occurs in the United States. The front-end manufacturing process determines all the inherent performance parameters of the RF FEM products.
At the conclusion of the front-end manufacturing process, the RF FEM dice are complete, having their full operational capability. The RF FEM dice then undergo package assembly, followed by a final testing and finishing process. The front-end manufacturing process which takes place within the United States comprises ten primary steps, some of which are repeated multiple times. Within the United States, the process begins with a raw SOI substrate wafer originating from France, Japan, or the United States.
The substrate then undergoes multiple photolithographic and chemical processing steps to transform the wafer into a set of RF FEM integrated circuits (i.e., chips or die).
The front-end processing that takes place within the United States include the following: (1) Oxidation (2) Photoresist application (3) Lithography (4) Etching (5) Resist removal (6) Layer deposition (7) Ion implantation (8) Chemical mechanical polishing (9) Metal Wiring (10) Testing The majority of the value, time, and process is attributed to this phase, which at its completion results in items having their essential character as RF FEM integrated circuits.
Upon completion of the front-end manufacturing process, the wafers are sent to China for the back-end manufacturing process. During the back-end process, the wafers, each containing numerous finished RF FEM integrated circuits, are diced, assembled, and packaged.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N347890).