The country of origin and marking of a set of two planters and two plant stands
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated April 17, 2025, you requested a country of origin ruling on two planters and plant stands The subject article is a set of two glazed dolomite clay planters and two engineered bamboo plant stands, part number 1807223. They are designed to hold indoor plants and described as follows. DOLOMITE PLANTERS The planter set consists of two planters made of fired dolomite clay with a glazed interior and exterior.
The planters are available in a variety of solid color glazes, including white, blue or green as well as textures— smooth, granular, ridged. They weigh approximately 2.25 kg (large) and 1.35 kg (small). The planter are cylindrical and measure approximately 23 cm (diameter) x 20 cm (height) and 19.6 cm (diameter) x 16.3 cm (height). The cost of the planters is between 60% and 70% of the total cost of the set. The planters are made in China.
BAMBOO STANDS The bamboo stands are made of engineered bamboo finished with lacquer or stain. The large bamboo stand measures approximately 27 cm (L) x 27 cm (W) x 18 cm (H) and the small bamboo stand measures approximately 24 cm (L) x 24 cm (W) x 15 cm (H). Each stand is comprised of four vertical dowels connected by rectangular cross pieces in the form of an “X”. The stands hold the planters approximately 5 cm off the ground. The large stand weighs approximately 360g and the small stand weighs approximately 300g.
The cost of the stands is between 30% and 40% of the total cost of the set. The stands are made in Vietnam and exported to China, where they are placed in retail packaging with the dolomite planters and exported to the United States. ISSUE What is the country of origin of the subject merchandise?
COUNTRY OF ORIGIN - LAW AND ANALYSIS: Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v. Friedlander & Co., 27 C.C.P.A. 297, 302 (1940).
Part 134 of the U.S. Customs and Border Protection (“CBP”) Regulations (19 CFR 134) implements the country of origin marking requirements and exceptions of 19 U.S.C. 1304. Section 134.1(b), CBP Regulations (19 CFR 134.1(b)), defines “country of origin” as the country of manufacture, production, or growth of any article of foreign origin entering the United States.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N347995).