The country of origin of household water filters
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Accordingly, the country of origin of the EWF-8056A and EFF-6035A household water filters will be Sri Lanka, which is where the carbon block is manufactured.
Ruling text
In your letter dated April 27, 2025, you requested a country of origin ruling. Descriptive literature was provided for our review. The items under consideration are described as household water filters, identified as model numbers EWF-8056A and EFF-6035A. The lead-free filters are long plastic filters that contain a carbon block for reducing 97% of chlorine, contaminants, and odor for better tasting water. The products are attached to water pipes on both ends of the filter.
They are suitable for a wide range of scenarios and can be used in such places as recreational vehicles, under kitchen sinks, etc. The filters generally follow the same structure and packaging steps, with the only difference being a slight change in size of the interfaces at both ends of the plastic shell. The EFF-6035A interface is ¼ inch while the EWF-8056A is ¾ inch. The filters are assembled in China using components manufactured in Sri Lanka and China.
The filter element is composed of a Chinese O-ring, upper cover, middle cover, bottom cover, sump, non-woven fabrics, claw interfaces, and a Sri Lankan carbon block. The carbon block removes contaminants from water through a process called “adsorption.” Adsorption is a process in which contaminants are attracted to the surface of the carbon granules and become trapped in the small pores of the filtration media.
The carbon block requires substantial processing to create and accounts for the largest cost of the overall filters. The entire production and packaging process includes six steps and is completed by six workers. It is divided into two parts: filter element assembly and product packaging. The filter element assembly consists of three steps and is completed by three workers.
The first step in the filter assembly process involves one worker placing the non-woven fabric on the upper cover and the cup base, then bonds them respectively and checks for no damage or dirt. The next step involves one worker loading the activated carbon purchased from Sri Lanka into the cup holder according to the weight requirement. The third step involves one worker operating a rotary welding machine to weld and bond the upper cover and the filled cup seat to form a complete filter element.
Finally, a self-inspection is performed to check that the product is free from stains, overflowing glue, cracking, etc. This is followed by boxing, sealing, and final packaging. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff?d, 989 F.2d 1201 (Fed. Cir. 1993).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N348297).