The country of origin of electric water filter dispensers
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated April 27, 2025, you requested a country of origin ruling on the electric water filter dispensers. The merchandise under consideration is referred to as electric water filter dispensers.
It is stated that the product models include but are not limited to WD-ED01W, WD-ED01B, WD-ED01LB, WD-ED01P, WD-EDC01W, WDEDC01B, WD-ED01AB, WD-ED01AW, BW-WD-ED10G, WD-ED61W, WD-ED61B, WDED02W, WD-ED02B, WD-ED04W-L and WD-ED04B-L. The electric water filter dispensers are almost the same in structure and the filters used for these machines are different in size, i.e., the WD-ED01 series and WD-ED61 series are for the 15-cup, WD-ED02 series is for 14-cup, and WD-ED04 series is for 27-cup models.
The electric water filter dispensers each are comprised of a transparent water tank, a water pumping unit and a tank lid. The water pumping unit contains a circuit board, a battery and a water purification filter element. The transparent water tank can be filled with tap water. The user can control the water by controlling the touch screen panel of the water applicator, and the water is then passed through the filter to remove dissolved solids and other impurities, and the clean water is always available.
The electric water filter dispensers do not incorporate a heating or refrigerating device (function). They are designed solely for water filtration purposes and do not alter the temperature of the water. The products use components manufactured in the Republic of South Korea and China. The key component of the filter, the carbon block, is purchased from South Korea, while other components are finished parts purchased from various suppliers in China.
The carbon block removes contaminants from water through a process called “adsorption.” Adsorption is a process in which contaminants are attracted to the surface of the carbon granules and become trapped in the small pores of the filtration media. The filter rods are made in South Korea from carbon blocks and non-woven fabric.
The carbon blocks are produced with carbon powder, binder, etc., by mixing these raw materials evenly under certain conditions, in which the powdered mixture is pressed into molds using a canning machine under pressure in the molding process. The molded carbon blocks are pre-baked in an oven at high temperature, and then compression at high temperature in a furnace.
During the compression process, the carbon blocks are heated to the point where the particles begin to bond together, resulting in a denser and more durable product. After the compression, the carbon blocks are cut and polished to their final dimensions and wrapped with non-woven fabric. The carbon rods are then shipped to China to combined with the Chinese-made parts and components, e.g., the sump assembly, water pumping unit and the tank and kit, to construct the finished electric water filter dispensers.
The sump assembly consists of a plastic middle cover, sump, cover, bottom cover and rubber O-rings. The water pumping unit consists of a plastic adapter, top cover, housing, water nuzzle, touch screen, solenoid valve, main control panel, diaphragm pump, silicone tube, PE tube, plug, battery and screws.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N348298).