The country of origin of a ground fault interrupter (GFCI) receptacle
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated April 10, 2025, you requested a country of origin ruling for the purposes of Section 301 measures on GFCI receptacles on behalf of your client, Leviton Manufacturing Co., Inc. The merchandise under consideration is identified as the GFCI receptacle, which is described as a plastic housing containing a printed circuit board assembly (PCBA), electrical contacts, terminals, and various subassemblies for protecting electrical circuits and sensing overload conditions.
The receptacle has a test button, a reset button, and two grounded electrical sockets on the front face. In use, the receptacle provides electrically protected power in commercial and residential applications. In your submission, you provide three production scenarios describing the receptacle’s manufacturing process.
In the first scenario, the PCBA is produced in Vietnam by soldering numerous electronic components, such as resistors, capacitors, transistors, diodes, integrated circuits, a voltage suppressor, etc. onto a bare printed circuit board through a surface mount (SMT) process.
The PCBA that is produced in Vietnam is said to be an incomplete, semi-finished PCBA that is then shipped to Mexico where numerous components of Chinese origin, such as contacts, the latching mechanism, the surge protector, the power sensing coil, the solenoid trigger assembly, and various terminals, are soldered onto the PCBA by a through hole insertion process.
Also in Mexico, the PCBA is programmed, tested, and inserted into the plastic housing along with the internal components, which are identified as Chinese origin terminals, the test/reset components, the front/middle/back plastic housings, and the Mexican origin test/reset components, and the trip slider subassembly. Once the GFCI receptacle is assembled and tested, it is packaged for export to the United States.
In the second scenario, the PCBA is produced in China by soldering numerous electronic components, such as resistors, capacitors, transistors, diodes, integrated circuits, a voltage suppressor, etc. onto a bare printed circuit board through a SMT process.
The PCBA that is produced in China is said to be an incomplete, semi-finished PCBA that is then shipped to Mexico where numerous components of Chinese origin, such as contacts, the latching mechanism, the surge protector, the power sensing coil, the solenoid trigger assembly, and various terminals, are soldered onto the PCBA by a through hole insertion process.
Also in Mexico, the PCBA is programmed, tested, and inserted into the plastic housing along with the internal components, which are identified as Chinese origin terminals, the test/reset components, the front/middle/back plastic housings, and the Mexican origin test/reset components, and the trip slider subassembly. Once the GFCI receptacle is assembled and tested, it is packaged for export to the United States.
In the third scenario, the PCBA is produced in China by soldering numerous electronic components, such as resistors, capacitors, transistors, diodes, integrated circuits, a voltage suppressor, etc. onto a bare printed circuit board through a SMT process.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N348392).