The tariff classification of multilayer wood flooring from Vietnam
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The rate of duty will be 8 percent ad valorem.
- The rate of duty will be 5.1 percent ad valorem.
Ruling text
In your letter, dated April 30, 2025, you requested a binding classification ruling on multilayer wood flooring. Product information and photos were submitted for our review. The first product under consideration is a multilayer wood flooring panel. The flooring panel is constructed of 12 plies. The face ply, measuring 3.95mm in thickness, consists of a continuous sheet of oak (Quercus spp., a non-coniferous wood) wood veneer.
The substrate plies all measure less than 2mm in thickness and consist of birch (Betula spp., a non-coniferous wood) wood. The grain of each ply is oriented at a 90-degree angle to the grains of the adjacent plies. The panel is tongued and grooved on its edges and ends, and the back ply is grooved crosswise at regular intervals. The product is not surface-covered with any material. The second product under consideration is a multilayer wood flooring panel. The flooring panel is constructed of ten plies.
The face ply, measuring 3.95mm in thickness, consists of a continuous sheet of walnut (Juglans spp., a non-coniferous wood) wood veneer. The substrate plies all measure less than 2mm in thickness and consist of birch (Betula spp., a non-coniferous wood) wood. The grain of each ply is oriented at a 90-degree angle to the grains of the adjacent plies. The panel is tongued and grooved on its edges and ends, and the back ply is grooved crosswise at regular intervals.
The product is not surface-covered with any material. In understanding the language of the Harmonized Tariff Schedule of the United States (HTSUS), the Explanatory Notes to the Harmonized System (ENs) may be utilized. The ENs, although not dispositive nor legally binding, provide a commentary on the scope of each heading of the HTSUS, and are the official interpretation of the Harmonized System at the international level.
See T.D. 89-80, 54 Fed. Reg. 35127, 35128 (August 23, 1989). “Plywood” is defined in the ENs for heading 4412, HTSUS: a panel “consisting of three or more sheets of wood glued and pressed one on the other and generally disposed so that the grains of successive layers are at an angle.” This definition describes the instant panels. Plywood is specifically provided for in heading 4412.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N348456).