The tariff classification of a metrology and inspection machine from Israel
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated May 1, 2025, you requested a tariff classification ruling. Descriptive literature was provided for our review. The item under consideration is described as the Eagle metrology and inspection machine, which is a device designed for two-dimensional (2D) and three-dimensional (3D) Automatic Optical Inspection (AOI). The Eagle provides comprehensive coverage for semiconductor manufacturing, supporting front-side inspection at sub-micron defect levels, as well as backside and edge inspection.
The 3D metrology solution delivers precise measurements for micro-bump coplanarity and height, handling up to 500 million bumps per wafer. The machine is specifically designed to inspect integrated circuits (wafers and chips) and measures features and defects on silicon wafers throughout the manufacturing process of semiconductor devices. The inspection covers the front and mid-end and up to the beginning of the assembly process (packaging and post-dicing).
The Eagle is used in semiconductor market segments, including Advanced Interconnect Packaging, Heterogenous Integration, Memory, Complementary Metal-Oxide-Semiconductor (CMOS) Image Sensors, Compound Semiconductors, Micro Electromechanical Systems (MEMS), and Radio Frequency (RF). The Eagle is fully self-sufficient with automatic handling of wafer sizes up to 300mm, including framed wafers.
The process flow consists of wafer removal from cassette by robot, pre-alignment, barcode reading, placement on the chuck table, inspection/measurement, removal of the wafer from the chuck table, and placement of the wafer back into the cassette. All data is recorded and saved on computer racks within the system. Measurements take place using various lenses and cameras within the system.
Measurements and inspection options included are incoming 2D quality, surface profile, redistribution layer (RDL), epitaxial, backside, backlit, 3D bumps, probe marks, layer thickness, post dicing, inner cracks, re-constructed wafers, edge/bevel, and infrared.
The applicable subheading for the Eagle metrology and inspection machine will be 9031.41.0040, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors; parts and accessories thereof: Other optical instruments and appliances: For inspecting semiconductor wafers or devices (including integrated circuits) or for inspecting photomasks or reticles used in manufacturing semiconductor devices (including integrated circuits): For inspecting semiconductor wafers or devices: For wafers.” The general rate of duty will be free.
Effective April 5, 2025, Executive Orders implemented “Reciprocal Tariffs.” All imported merchandise must be reported with either the Chapter 99 provision under which the reciprocal tariff applies or one of the Chapter 99 provisions covering exceptions to the reciprocal tariffs. At this time products from all countries will be subject to an additional 10 percent ad valorem rate of duty. At the time of entry, you must report the Chapter 99 heading applicable to your product classification, i.e.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N348508).