The country of origin and marking of the contents of a dishwasher installation kit
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated May 6, 2025, you requested a country of origin and marking ruling of a dishwasher installation kit, on behalf of your client Electrolux Consumer Products, Inc. The product under consideration is a dishwasher installation kit.
The kit includes a 6ft. water supply line consisting of extruded polyvinyl chloride (PVC) hose reinforced a braided stainless-steel sleeve with fittings attached, a 6 ft. 3 wire electric cord, a brass hose elbow, a compression elbow, a stainless-steel hose clamp, a Romex connector, Teflon tape, and plastic wire nuts. This office considers the installation kit to be a set for tariff classification purposes, with the essential character imparted by the 6’ water supply line.
The 6 ft. 3 wire power cord. brass hose elbow, compression elbow, a stainless-steel hose clamp, Romex connector, Teflon tape, and plastic wire nuts are all of Chinese origin. They are merely packed together with the hose in China. The 6 ft. hose under review undergoes two manufacturing phases. The first manufacturing phase takes place in Taiwan. Polyvinyl chloride resin is extruded to form a PVC hose. The hose is then layered with an integrated braided nylon mesh and covered with a clear vinyl jacket.
The hose is then spooled onto rolls for shipment and further processing. The second manufacturing phase takes place in China. The rolls of hose are shipped to China where they are reinforced by braiding stainless steel around the hoses. The hoses are cut to a length of 6 feet and the brass fittings are attached. When determining the country of origin for purposes of applying current trade remedies under Section 301, the substantial transformation analysis is applicable.
See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence.
See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). In this case, the reinforcement with braided materials, cutting to length, and the addition of the Chinese fittings does not substantially transform the hose. Therefore, the country of origin of the finished hose with fittings is considered to be Taiwan.
Pursuant to 19 CFR 134.1(b), each piece within a kit retains its own country of origin which must be marked if it is of foreign origin unless the packaging of the pieces together effects a substantial transformation. A substantial transformation occurs when articles lose their identity and become new articles having a new name, character or use. Merely packaging parts of a kit together does not constitute a substantial transformation.
The parts involved in this kit were merely packaged together and are not substantially transformed. Therefore, the individual parts retain their individual countries of origin. The marking statute, section 304, Tariff Act of 1930, as amended (19 U.S.C.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N348679).