The country of origin of the Portable Storage Generator
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated May 9, 2025, you requested a country of origin ruling on behalf of your client, Jackery, Inc. The merchandise under consideration is identified as the Portable Solar Generator, Model HTE1172000A-US-JAK (“E2000v2”), which is described as an electrical storage and distribution machine that incorporates a converter, inverter, multiple output connections, and is equipped with a bank of lithium iron phosphate (LiPO) batteries.
On the front face of the E2000v2 is a small LCD screen, three NEMA 15-20R electrical sockets for AC output, one USB-A/two USB-C sockets for DC output, one 12 VDC accessory socket, a LED area light, and control buttons. On the right side of the unit are three input sockets, one AC and two DC. The LCD displays electrical input/output, performance data, connectivity (wireless and/or Bluetooth), environmental information, and stored power data.
Internally, the E2000v2 consists of the housing components, the LiPO battery bank, six printed circuit board assemblies (PCBAs), numerous electrical connectors and/or bus bars, and insulators. In use, the E2000v2 is connected to a power source to store electricity, where users have the ability to access the stored power through connected machines and appliances.
While the E2000v2 is described in your letter as a “solar charger”, we note that the unit can receive input mains AC power, DC power from a DC generating device, such as a photovoltaic generator, or even a vehicle’s DC power, if so equipped. You identify the PCBAs as the Mainboard, the Battery Protection Board, the AC Adapter Board, the DC Adapter Board, the Module Adapter Board, and the Inverter.
You describe the Mainboard as being responsible for controlling the logic of each module in the system, providing electrical protection, and providing intelligent control. The Battery Protection Board is described as the core control unit that controls the functions of the batteries, monitors, and provides electrical protection to the battery pack. The AC Adapter Board is described as providing a parallel circuit connection for the front AC sockets.
The DC Adapter Board is described as integrating low-voltage DC charging and transfer functions. The Mobile Adapter Board is described as monitoring the battery cell voltages and temperatures, transmitting the values to the battery management system. And the Inverter is described as performing conversion of electricity, such as the AC to DC and DC to AC conversions, and performing voltage step up/down.
Each of the PCBAs identified above are manufactured by soldering individual components, such as resistors, capacitors, integrated circuits, transformers, etc. onto bare printed circuit boards through a surface mount and/or through-hole insertion process. In your submission, you provide four scenarios of where the PCBAs are manufactured and the E2000v2 is assembled.
In the first scenario, the Mainboard, the Battery Protection Board, the AC Adapter Board, the DC Adapter Board, and the Module Adapter Board are being manufactured in China. The Inverter is said to be manufactured in Japan.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N348871).