The classification and country of origin of worm gear operators
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated May 12, 2025, you requested a classification and country of origin ruling for worm gear operators. The items under consideration are referred to as S04 worm gear operators. The operators consist of a handwheel joined to a housing that encases a worm gear, a segment, a bearing, O-rings, a retainer plate and an indicator plate.
Once a worm gear operator is joined to a valve, the user turns the handwheel, which causes the teeth of the worm and the segment to mesh, allowing the torque needed to open and close the valve to be amplified.
The applicable subheading for the S04 worm gear operators will be 8483.40.9000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Transmission shafts (including camshafts and crankshafts) and cranks; bearing housings, housed bearings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints); parts thereof: Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately; ball or roller screws; gear boxes and other speed changers, including torque converters: Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately.
The general rate of duty is 2.5 percent ad valorem. With respect to the origin of the worm gear operators, the final assembly for the three scenarios occurs in Malaysia. The components in the three scenarios are sourced from China, except for the worm gear in scenario two and the segment in scenario three. These components are sourced from Malaysia.
The final assembly, which consists of the same processes for the three scenarios, begins by applying grease to O-rings that are intended to be installed on a segment and a shaft. Next, a segment is inserted into a worm gear operator. Afterwards, a bearing is lubricated and installed, and the input shaft of the handwheel is inserted into the housing and through the worm gear. To maintain the position of the shaft, a spring pin is hammered through the aligned holes of the worm gear and input shaft.
While the shaft is rotated, grease is applied. Subsequently, a retainer plate, a position indicator plate and a gasket are fastened in place. The greased O-rings are installed in the required positions during the aforementioned steps, and the worm gear operator is continuously aligned with appropriate adjustments being made during the alignment processes.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N348906).