The tariff classification and country of origin of long nose pliers, linesman pliers, and diagonal pliers
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The general rate of duty will be 12¢/doz. + 5.5% ad valorem.
Ruling text
In your letter dated May 7, 2025, you requested a tariff classification and country of origin determination ruling. In your letter dated May 7, 2025, you requested a tariff classification and country of origin determination ruling for three different types of pliers. The pliers are identified as long nose pliers, linesman pliers, and diagonal pliers. You provided photographs and descriptions of each stage of the manufacturing process for each of the pliers.
The features and characteristics of the pliers are as follows: Long nose pliers (also known as needle-nose pliers) are gripping, pinching, and holding pliers. They incorporate long thin jaws with a small cutting edge near the pliers’ joint. They are made of two pieces of steel, with each piece providing half of the handle and half of the working end. When joined together, the joint provides a fulcrum that transfers and increases the force applied to the handles by the user to the working end.
Lineman pliers are a type of pliers used by linemen, electrical contractors, and other tradesmen primarily for gripping, twisting, bending, and cutting wire, cable, and small metalwork components. They are made of two pieces of steel, with each piece providing half of the handle and half of the working end. They have a beveled cutting edge near the joint of the working end’s jaw and teeth for gripping at the end of the nose. Diagonal pliers are used for cutting wire.
They are made of two pieces of steel, with each piece providing half of the handle and half of the working end. The plane defined by the cutting edges of the jaws intersects the joint rivet at an angle or “on a diagonal.” The jaw edges are ground to a symmetrical “V” shape, and they cut by indenting and wedging the wire apart.
The applicable subheading for the long nose pliers, linesman pliers, and diagonal pliers, will be 8203.20.6030, Harmonized Tariff Schedule of the United States (HTSUS), which provides for files, rasps, pliers (including cutting pliers), pincers, tweezers, metal cutting shears, pipe cutters, bolt cutters, perforating punches and similar handtools, and base metal parts thereof: Pliers (including cutting pliers), pincers, tweezers and similar tools, and parts thereof: Other: Other (except parts). Pliers.
The general rate of duty will be 12¢/doz. + 5.5% ad valorem. You describe the manufacturing processes for the three pliers as follows: The handles and jaws of the Long Nose Pliers are drop-forged from raw steel rods in Thailand, forming the rough shape of each. Further in Thailand, each handle is die-cut, deburred, and sandblasted.
The two halves of the pliers (i.e., the pieces incorporating the handles and jaws) are then sent to China, where two holes are drilled into each piece so that they can be joined together. Teeth are then cut into the jaws, and the pieces undergo heat-treatment and polishing. Finally, the two halves are assembled with rivets, soft grips are slipped over the handles, and the finished pliers are packaged for retail sale.
The manufacturing process for the Linesman Pliers involves drop-forging raw steel rods in Thailand to create the basic shape of the handle and jaw.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N348943).