The country of origin of a digital stick thermometer
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated May 15, 2025, on behalf of your client, Fortunit Creative Co., Ltd., you requested a country of origin ruling on a digital stick thermometer. The item under consideration is described as a digital human body temperature thermometer (part number DMT-418), which is a digital stick thermometer that provides the temperature reading to the user via an integrated backlit LED screen.
In operation, the user will place the thermometer in the mouth, rectum, or under the armpit and wait for the reading to display. When the temperature detected by the thermometer does not rise for 4 seconds, the sound is prompted, and the accurate temperature value is displayed. The DMT-418 is accurate to plus or minus 0.2 degrees Fahrenheit within a range of 90 degrees Fahrenheit to 109.9 degrees Fahrenheit.
The thermometer is powered by a 1.5 V button battery, measures 13.9 cm by 2.3 cm by 1.2 cm, and weighs 12 grams. To manufacture the digital human body temperature thermometer components are gathered from China and Cambodia. The Chinese components include the MT movement, LCD screen, MT sheath, buzzer, conductive shrapnel, conductive bar, conductive point, Chip-on-Board (COB), sensor, battery and battery clamps.
The Cambodian components include the label, giftbox, manual, inner box, carton box, enclosure, cover and dustproof case. The complete assembly is performed in Cambodia. In Cambodia, the process starts by placing the movement and the conductive points into the movement vibration plate. Next, the positive and negative battery clips are placed in the fixed area of the connecting tape. The battery is then placed on the drive belt in the battery area and the battery materials are prepared.
During the automatic assembly process, the battery voltage of each assembled product is detected. After completing the material preparation and inspection work, the automated assembly production is completed. Next, tweezers are used to remove the protective film on the front of the LCD and check whether the LCD screen is damaged. Next, the COB and sensor are generated by using an automatic soldering machine.
The user arranges the MT COBs neatly on the plate arrangement fixture distinguishing the front and back direction. After the arrangement is completed, the machine is started, and the automatic rotation cycle welding begins. The worker then places the MT18 movement, with the battery holder already installed, into the movement vibration plate. The liquid crystal film bubble shell tray is then placed along with the buzzer sheets.
Next, the positive conductive string piece of the buzzer sheet, the conductive strip and the negative conductive spring piece of the buzzer sheet are placed. The welded COBs are then added to the belt and the automated hot-pressing step is completed. The thermometer is then inserted into the head of the sheath, ensuring the black end of the sensing wire can be inserted into the bottom of the steel sheath. The product is then left for 24 hours to dry.
The completed thermometer is then ready for screen printing the customer’s information, final testing, and packaging.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N349038).