The tariff classification and country of origin of tin snips and aviation snips
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated May 19, 2025, you requested a tariff classification and country of origin determination ruling for tin snips and aviation snips. Each tool is made primarily of steel and is used to cut metal. You provided photographs and descriptions of each stage of the manufacturing process for each tool. The features and characteristics of the tools are as follows: The tin snips consist of two primary pieces, which are the left and right side of the tool.
Each piece incorporates a handle with a hand/finger ring on one side and a cutting end on the other. The handles are joined by a pin near the cutting end, which provides a fulcrum, allowing the scissor action of the tool. The subject articles also have a comfort grip applied to the handles. Aviation snips are compound action snips that have a mechanical linkage that provides a greater advantage than the scissor design of tin snips. Accordingly, they can cut thicker metal than tin snips.
The applicable subheading for the tin snips and aviation snips will be 8203.30.0000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for files, rasps, pliers (including cutting pliers), pincers, tweezers, metal cutting shears, pipe cutters, bolt cutters, perforating punches and similar handtools, and base metal parts thereof: metal cutting shears and similar tools, and parts thereof. The general rate of duty will be free.
In your request, you describe the following manufacturing processes for the two tools: Tin snips: In Thailand, raw steel rods are heated and drop-forged to make the two primary pieces of the tool (i.e., the right and left side). Each of these pieces incorporates the handle on one side and the cutting edge on the other. The two pieces are die-cut, sandblasted, and deburred. They are then sent to China where a hole is drilled into each, the finger/hand holes are punched, and the pieces are heat-treated.
The right and left sides are assembled using a Chinese origin screw and nut through the hole, and the comfort grip is applied over the handles. Aviation snips: In Thailand, raw steel rods are heated and drop-forged into the two rough shapes that make up the head of the snips. The head incorporates the cutting part of the tool, the fulcrum, and upper section of the handle. These two pieces are then die-cut into their overall shape and form and further sandblasted.
Next, raw steel sheet is die-cut into a flat outline of the two lower handle sections. The disassembled head and handles are then sent to China where they are heat-treated and drilled with holes for assembly with screws and nuts. The lower handles are bent into their final form and the blades on the head are sharpened. They are then assembled using Chinese origin screws and nuts. Finally, the Vietnamese steel handles receive a comfort grip before retail packaging.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and other duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N349152).