The country of origin of a hydraulically-powered injection molding machine.
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Therefore, the country of origin of the T-WIN 11600/1460 series injection molding machine will be Mexico.
Ruling text
In your letter dated May 21, 2025, on behalf of your client Engel Machinery Inc., you requested a country of origin ruling. The Engel T-WIN 11600/1460 series (T-WIN) is a hydraulically-powered, customizable injection molding machine designed to mass produce a wide range of medium to large-sized molded plastic products. Components from these units are manufactured in China, European Union (EU) countries, and Mexico. In your submission, you provided a description of the manufacturing process for the T-WIN.
The complete T-WIN is comprised of four principal units: injection unit, clamping unit, frame, and electronics.
The injection unit consists of: (1) a plasticizing unit, a key component made up of a barrel, worm screw, heater bands, and electrical connections, which melts raw plastic pellets and prepares the material for injection into the mold cavity; (2) the basic injection unit “skeleton” which is a metal part the motor is mounted on; (3) servo motors which regulate the entire operation of the clamping unit including plasticizing screw rotation within the barrel; (4) hydraulics for moving the screw to the melt and injecting the plastic material into the mold; (5) rails and slides to guide the moving part of the injection unit; and (6) miscellaneous auxiliary electrical, mechanical and other parts for assembly, functionality and maintenance.
The clamping unit consists of the moving platen, fixed platen, hydraulic and pneumatic components, tie bar system, interlocks, a servo motor, a support assembly, sensors, thermometers, gauges, and miscellaneous auxiliary components. The frame is the structural foundation and is comprised of two parts, one for the clamping unit and the other of the injection unit.
Finally, the electronics include the controller, servo drive, wiring components, electric components, cable harnesses, transformers, resistors, fuses and miscellaneous items. Engel manufactures the T-WIN at its facility in Mexico, utilizing approximately 1,700 components sourced from China, the EU, and Mexico.
You state that 38% of the T-WIN’s total value is derived from Chinese-origin components, which in terms of value consist largely of four cast metal structural parts, i.e., the basic injection unit skeleton, fixed platen, movable platen, and tie bar system. In addition, several components sourced from EU countries, including those for the plasticizing unit and hydraulic systems, are shipped from the EU to Mexico to be assembled with the Chinese cast components.
The EU components account for approximately 34% of the total value of the injection molding machine. Mexican components include certain mechanical components of the injection and clamping units, the frame, and cable harnesses. In Mexico, the EU components are assembled with the Chinese components and Mexican components. The assembly process in Mexico involves the integration of hundreds of components into units and the subsequent assembly of a fully functional injection molding machine.
You state that the process spans four to six weeks and requires advanced expertise in electrical, mechanical, and software engineering.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N349311).