The tariff classification of a transmission control unit from Korea
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated May 22, 2025, you requested a tariff classification ruling. The merchandise under consideration is identified as two models of a Shift By Wire (SBW) Control Unit Assembly, further identified by part numbers 42950-2D085 and 42950-2N110. You state that the two versions are virtually identical and function the same with the only difference being the shape of the bracket that is attached and used to mount the device within a vehicle.
The subject device consists of a populated printed circuit board assembly (PCBA) with an electrical connector at the base, within a metal enclosure. As noted above, a metal bracket for installation is on the outside of the housing. In use, the subject assembly is installed within a vehicle and electrically connected to the transmission system in order to process and control various safety and convenience functions. These features include the interaction with three main functions of the vehicle.
The first is described as a motor control feature. When the driver changes the transmission lever (i.e. from Park to Drive), the subject unit receives, analyzes and converts the signal, which notifies the transmission actuator to shift to the appropriate gear position. The next function is noted as a safety feature that automatically switches the position of the transmission from either Drive or Reverse to Park if the driver shuts off the car prior to placing the vehicle in Park.
The SBW unit analyzes the conditions of the transmission and the status of the vehicle and makes the appropriate decision to automatically change the gear position. This function is also used in the event that the vehicle is turned off while the vehicle is in Neutral. In this case, the SBW will allow the transmission to stay in the Neutral position in specific instances, such as a car wash.
The final function is described as a Fail Safe function, which monitors and detects the transmission system for a number of failures and makes the appropriate decision to safely change any gear position. The SBW assembly is designed to detect failures in various components, such as actuators and sensors, and to switch the vehicle to a safe mode in the event of an issue.
The SBW unit analyzes the failures and sends a signal to the appropriate unit within the vehicle that will switch the vehicle to a safe condition, such as neutral or park. In your request, you suggest that the correct classification for the control unit assembly is 8543.70.9860, Harmonized Tariff Schedule of the United States (HTSUS). We agree.
The applicable subheading for the SBW Control Unit Assembly, part numbers 42950-2D085 and 42950-2N110, will be 8543.70.9860, HTSUS, which provides for “Electrical machines and apparatus, having individual functions, not specified or included elsewhere in this chapter; parts thereof: Other machines and apparatus: Other: Other: Other: Other.” The general rate of duty will be 2.6% ad valorem.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N349349).