The classification and country of origin of worm gear operators
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Thus, based on the totality of the circumstances, the country of origin of the worm gear operators, as described above for scenarios one, two, and three, will be China.
Ruling text
In your letter dated May 12, 2025, you requested a classification and country of origin ruling for worm gear operators. The items under consideration are referred to as S05 worm gear operators. The operators consist of a handwheel joined to a housing that encases a worm gear, a segment, bearings, O-rings, a cover plate, and a declutch cam and lever. Once a worm gear operator is joined to a valve, the user engages the declutch lever to connect the worm gear to the segment.
The handwheel is then rotated, which causes the teeth of the worm and the segment to mesh, allowing the torque needed to open and close the valve to be amplified.
The applicable subheading for the S05 worm gear operators will be 8483.40.9000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Transmission shafts (including camshafts and crankshafts) and cranks; bearing housings, housed bearings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints); parts thereof: Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately; ball or roller screws; gear boxes and other speed changers, including torque converters: Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately.
The general rate of duty is 2.5 percent ad valorem. With respect to the origin of the worm gear operators, the final assembly for the three scenarios occurs in Malaysia. The components in the three scenarios are sourced from China, except for the worm gear in scenario two and the segment in scenario three. These components are sourced from Malaysia. The final assembly, which consists of the same processes for the three scenarios, begins by applying grease to O-rings used on a segment, a worm gear and a shaft.
A segment is then inserted into a worm gear operator, and afterwards, the O-rings used with the shaft are installed. Next, the bearings and the O-rings are installed into the handle housings, which are subsequently installed into the housing using retainer clips. The input shaft is then inserted into the worm gear operator housing and through the worm gear. After the input shaft hole is aligned to the worm gear hole, a spring pin is hammered through the aligned holes of the worm gear and the input shaft.
Next, a handle housing is connected to the handle grip using fasteners and two handle stops are installed onto the housing. Lastly, a gasket and a cover plate are installed, and bolts are used to secure the components in place. Afterwards, grease is applied, and the input shaft is turned back and forth. As the worm gear is positioned open, adjustments are made.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N349379).